IDLER GP-FRONT 4691394 - Caterpillar

Reset - The trip totals can be reset in the display by selecting the reset icon. Average Fuel Rate - Displays the calculated hourly fuel consumption rate of the machine since the last trip reset.Total Fuel - The Total Fuel displays the total fuel used since the last trip reset. This display includes fuel used by both the engine and aftertreatment system. Idle Fuel - Displays the total fuel consumed during idle conditions since the last trip reset.Idle Time - Displays the number of operating hours where the machine was in an idle condition since the last trip reset.Operating Hours - Displays the number of hours that the machine has been operating since the last trip reset.Odometer - Displays the total distance the machine has driven in forward/reverse gear since the last trip reset.Service
Service Screen - The Service screen allows the operator or service technician to change more advanced machine configurations or perform various calibrations. Some screens in the Service Menu are password protected for the service technician. Consult your Cat dealer for information about the service menu options.The Service Menu is arranged in five different areas:
Diagnostics
Configurations
Calibrations
ECM Summary
Service ModeDiagnostics
Diagnostics menu - The Diagnostics menu option provides the operator or technician a list of any active or logged diagnostic codes or events that have occurred on the machine. To view additional details of a particular code, use the up or down arrows at the top of the screen to highlight the desired code then select "OK".Configurations
Configurations Menu - The configurations menu option allows the operator or technician to change the advanced operational settings of the major systems. The menu organizes the systems into the following categories:
MachineAdditional configuration option menus may be available if certain features are installed on the machine.Machine
Auto Rear WiperAllows the operator to ENABLE or DISABLE the automatic rear wiper feature. The feature will automatically engage the rear window wiper when the machine is placed in reverse and the front wiper is activated.
BeaconAllows the operator to ENABLE or DISABLE the beacon feature. The feature allows for the beacon power connector to be controlled by the button on the keypad.Calibrations
Calibrations Menu - The calibrations menu option allows the operator or technician to perform various calibrations on the machine without the need for a service tool. The default calibrations present on the machine must be enabled via the service mode. Additional non-password protected calibration option menus may be available if certain features are installed on the machine.ECM Summary
ECM Summary - The ECM Summary menu allows the operator or technician to view the ECM information. Software and hardware information is provided for the various electronic control modules installed on the machine. Engine
Electronic Control Module (ECM) Serial Number
Hardware (HW) Part Number
Software (SW) Part