IDLER GP-FRONT 4691395 - Caterpillar

Illustration 1 g02727552
(1) Reservoir (2) Dust Cap (3) Fill LocationGrease reservoir (1) is located on the RH platform closed to the cab.The Caterpillar Automatic TWIN Greasing System
The automatic lubrication system consists of an electrical system and a lubrication system. These systems work together. The electrical system turns the automatic lubrication system on and off at periodic intervals.ReferenceRefer to System Operation, RENR 6331 for more information on the Automatic TWIN Greasing System.The lubrication system consists of the following items:
Grease pump with integrated control unit
Distribution blocks with metering units
Indicator fault display integrated in the system monitoring systemThe lubrication system will automatically lubricate all of the points that are connected to the system. The system is on a timed cycle.Operator Controls
On the display system, navigate to the Autolube System. Select Service/Configurations/Machine/Autolube.Select the required grease interval.The "Light" setting will provide grease every 45 minutes. The "Medium" setting will provide grease every 30 minutes. The "Heavy" setting will provide grease every 15 minutes. Location of Grease Points
The lubrication system will automatically lubricate the following points:
The linkage pins for the loader bucket
Bearings for the lift cylinders
Bearings for the tilt cylinders
Upper sleeve bearing and middle sleeve bearing for the bucket tilt levers
Upper sleeve bearing for the bucket lift arms
The articulation hitch (upper and lower)
The steering cylinder pins
The axle oscillating bearingsNote: The Autolube System does not provide lubrication to the drive shaft support bearing, the drive shaft spline (center), the drive shaft universal joints, the hood tilt actuator and roading fenders (If equipped).