AVSPARE.COM
parts catalog

IDLER AS 4752636 - Caterpillar


4752636 IDLER AS Caterpillar parts
Rating:
22
Alternative (cross code) number:
CA4752636
475-2636
4752636
Caterpillar 4752636 IDLER AS
Weight: 4243 pounds 1924 kg.

Buy IDLER AS 4752636 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Sudden movement of the machine or the release of oil under pressure can cause personal injury. At operating temperature, the hydraulic oil is hot and under pressure. Hot oil can cause burns. To prevent possible personal injury, release the pressure in all of the implement circuits before any hydraulic lines or components are disconnected or removed.
1. Release the pressure in the hydraulic system as follows:a. Move the machine to a smooth horizontal location. Move away from working machines and personnel.b. Permit only one operator on the machine. Keep all other personnel either away from the machine or in view of the operator.c. Move the switch for the CUSHION-HITCH to the "LOCKDOWN" position. Be sure the rear bracket assembly of the hitch is down against (resting on) the front hitch assembly.d. Activate the parking and secondary brakes. Lower the bowl to the ground. Lower the apron. Stop the engine.e. Move all scraper control levers to all positions to release the pressure in the hydraulic system.f. Carefully loosen the fill cap on the hydraulic oil tank to release the pressure in the tank.g. Be sure all hydraulic pressure is released before any fittings, hoses or components are loosened, tightened, removed or adjusted. Wait at least five minutes after the machine is turned off. 2. Using Tool (A), remove oil filter (5).3. Disconnect tube assembly (1) from the filter base. Disconnect hose assemblies (3) and (4) from the filter base.4. Remove two bolts (2), the washers and the filter base from the machine. The following steps are for the installation of the case drain filter.5. Check the condition of the O-ring seals used in the ends of the hose assemblies and tube assembly that connect to the oil filter base. If any of the seals are damaged, use new parts for replacement.6. Install the case drain filter in the reverse order of removal.7. Check the oil level in the hydraulic oil tank. If necessary, fill the hydraulic oil tank with oil to the correct level. For the correct filling procedure and for details regarding service intervals for the case drain filter, see the Operation & Maintenance Manual for 623F Elevating Wheel Tractor-Scrapers, SEBU6720.


Parts idler Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.