IDLER AS 6S9367 - Caterpillar

6S9367 IDLER AS Caterpillar parts 931B, D3, D4C III

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6S9367
6S-9367
6S9367

Weight: 103 pounds 46 kg.

Buy IDLER AS 6S9367 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER, TRACK-TYPE TRACTOR,

This part in 1 request: Show. This information for suppliers only!

#402377 6S9367

2019-12-20

Compatible equipment models: 6S9367:

TRACK LOADER 931B

TRACK-TYPE TRACTOR D3 D4C III Caterpillar

Number on catalog scheme: 20

Caterpillar 6S9367 Parts scheme IDLER AS

For full view, you need register

Information:

Illustration 1 g01959164
Connections of the dropbox disconnect disengage solenoid 2 on a CX31-P600 with a dropbox
This diagnostic code is associated with the dropbox disconnect disengage solenoid 2. The FMI 05 means that the ECU has determined that an open in the circuit exists.The possible causes of this diagnostic code are listed below:
The energize circuit of the solenoid is open.
The return circuit of the solenoid is open.
The solenoid has failed.
The ECU has failed. This is unlikely.Note: The following test procedure may create other diagnostic codes. Ignore these created diagnostic codes and clear these diagnostic codes when the original diagnostic code has been corrected. Ensure that the diagnostic code of CID 2863 FMI 05 is active before performing this procedure.Note: Use a digital multimeter for the measurements in this procedure.Test Step 1. CHECK THE SOLENOID.
Turn the disconnect switch and the key start switch to the ON position. Do not start the engine.
Disconnect the solenoid with the active diagnostic code from the machine harness.
At the machine harness connector for the solenoid, place a jumper wire from contact 1 (wire X961-GY(Grey)) to contact 2 (wire M739-YL(Yellow)).
Observe the status of the CID 2863 FMI 05. Expected Result:The diagnostic code