IDLER GP-FRONT 8P2909 - Caterpillar

8P2909 IDLER GP-FRONT Caterpillar parts D5, D5B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8P2909
8P-2909
8P2909

Weight: 0.05 pounds 0 kg.

Buy IDLER GP-FRONT 8P2909 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 8P2909:

TRACK-TYPE TRACTOR D5 D5B Caterpillar

For full view, you need register

Information:

Removal Procedure
Illustration 1 g02797264
Disconnect harness assembly (1) and remove clip (2).
Loosen clamp assemblies (3) and remove the exhaust gas venturi assembly (5). Note: Clamp assemblies (3) are one-time use parts, and should be discarded after removal. Install new clamp assemblies.
Remove hoses (4) and discard the hoses. Note: Hoses (4) are one-time use parts, and should be discarded after removal. Install new hoses.
Remove clamp assembly (6) and the tube assembly if needed. If clamp assembly (6) is removed, discard the clamp assembly. Note: Clamp assembly (6) is a one time use part, and should be discarded after removal. Install a new clamp assembly.
Illustration 2 g02797267
Remove NRS intake pressure sensor (7) and the O-ring seal. Assembly Procedure
Assemble exhaust sensor lines group in the reverse order of removal.
Tighten NRS intake pressure sensor (7) to a torque of 10 2 N m (89 18 lb in).
Tighten clamp assembly (6) to a torque of 8.5 2 N m (75 18 lb in).