9W9444 IDLER & BEARING AS Caterpillar parts
320 L
Rating:
Alternative (cross code) number:
CA9W9444
9W-9444
9W9444
CA9W9444
9W-9444
9W9444
Weight: 150 pounds 68 kg.
EXCAVATOR,
You can buy:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CARTEX for FITS Caterpillar Excavator FITS CAT 320 320L 320N Idler 9W-9444
CARTEX Whether you're a professional mechanic or a DIY enthusiast,We've got you covered with a wide range of parts that meet the highest standards of quality and performance. || Order your High Quality Part with peace of mind, knowing we prioritize your satisfaction. Quality Parts, Superior Performance - it's not just a promise, it's our standard || QUESTIONS? : We at CARTEX - High Quality Parts USA has more than 40 years of experience in industry and has in-house technicians, If you are not sure if this part fits your machine or tractor, just send us an email before you make the purchase and our in house technicians will revert back to you, right away.
CARTEX Whether you're a professional mechanic or a DIY enthusiast,We've got you covered with a wide range of parts that meet the highest standards of quality and performance. || Order your High Quality Part with peace of mind, knowing we prioritize your satisfaction. Quality Parts, Superior Performance - it's not just a promise, it's our standard || QUESTIONS? : We at CARTEX - High Quality Parts USA has more than 40 years of experience in industry and has in-house technicians, If you are not sure if this part fits your machine or tractor, just send us an email before you make the purchase and our in house technicians will revert back to you, right away.
$2,270.12
01 Mar 2022
CN: Zhengzhoucangke
For Caterpillar Excavator CAT 320 320L 320N Idler 9W-9444
N\C Part Number:9W-9444 || Applications:For Caterpillar Excavator CAT 320 320L 320N
N\C Part Number:9W-9444 || Applications:For Caterpillar Excavator CAT 320 320L 320N
$2,271.00
01 Mar 2022
CN: will be ok
For Caterpillar Excavator CAT 320 320L 320N Idler 9W-9444
N\\C Part number:9W-9444 || Application:For Caterpillar Excavator CAT 320 320L 320N
N\\C Part number:9W-9444 || Application:For Caterpillar Excavator CAT 320 320L 320N
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 9W9444:
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns.To prevent possible personal injury, release the pressure in the implement hydraulic circuit (boom, stick, bucket, and swing), travel circuits, and the hydraulic oil tank at the filler cap before any hydraulic lines or components are disconnected or removed.Remove the filler cap only when the engine is stopped and the filler cap is cool enough to touch.
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release" in this manual.
Drain the oil from the hydraulic oil tank into a container suitable for storage or disposal. The capacity of the hydraulic oil tank is approximately 135 L (36 US gal).Note: The downshift inhibitor is mounted to the rear of the transmission housing.
Put identification marks on all hoses and on all tube assemblies for installation purposes.
Illustration 1 g00682138
Disconnect three tube assemblies (2). Disconnect two hoses (4). Put plugs in the ends of the tube assemblies and in the ends of the hoses. Put caps on the downshift inhibitor. Plugs and caps prevent oil loss. Plugs and caps prevent contaminating the hydraulic system.
Remove four socket head bolts (1). Remove downshift inhibitor (3) from the transmission housing.
Illustration 2 g00682143
Remove O-ring seal (5) from the downshift inhibitor.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns.To prevent possible personal injury, release the pressure in the implement hydraulic circuit (boom, stick, bucket, and swing), travel circuits, and the hydraulic oil tank at the filler cap before any hydraulic lines or components are disconnected or removed.Remove the filler cap only when the engine is stopped and the filler cap is cool enough to touch.
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release" in this manual.
Drain the oil from the hydraulic oil tank into a container suitable for storage or disposal. The capacity of the hydraulic oil tank is approximately 135 L (36 US gal).Note: The downshift inhibitor is mounted to the rear of the transmission housing.
Put identification marks on all hoses and on all tube assemblies for installation purposes.
Illustration 1 g00682138
Disconnect three tube assemblies (2). Disconnect two hoses (4). Put plugs in the ends of the tube assemblies and in the ends of the hoses. Put caps on the downshift inhibitor. Plugs and caps prevent oil loss. Plugs and caps prevent contaminating the hydraulic system.
Remove four socket head bolts (1). Remove downshift inhibitor (3) from the transmission housing.
Illustration 2 g00682143
Remove O-ring seal (5) from the downshift inhibitor.
Caterpillar parts catalog:
Parts idler Caterpillar catalog:
311, 311B, 312, 312B, 315, 315B, 315B FM L, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 320N, 321B, 321C, 325D, 329D L, 345C L, OEMS
6I6538
IDLER GP-FRONT
320, 320 L, 320N, OEMS
320, 320 L, 320N, OEMS
320 L, 320N
320, 320 L, 320N
1154926
IDLER & BEARING AS
311, 311B, 312, 312B, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 321C, OEMS
311, 311B, 312, 312B, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 321C, OEMS
311B, 311C, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321B, 321C, 323D L, 323D LN
1129939
IDLER AS.
320 L
320 L
320 L
3845482
IDLER & BEARING AS
320D, 320D FM
320D, 320D FM
1388389
IDLER & BEARING AS
345B, 345C, 350
345B, 345C, 350
2086620
IDLER & BEARING AS
1090, 1190T, OEMS, TK711
1090, 1190T, OEMS, TK711
2979108
IDLER GP-FRONT
320C FM
320C FM
1290T, 1390, 2491, 2590, 330, 330 FM L, 330B L, 330D, 345C L, 345D, 349D L, 532, 541, 551, 552, 552 2, OEMS, TK732, TK751, TK752
2070472
IDLER & BEARING AS
1190, 1190T, 1390, 2390, 2391, 521, 522, OEMS, TK721, TK722, TK741
1190, 1190T, 1390, 2390, 2391, 521, 522, OEMS, TK721, TK722, TK741
3599579
IDLER & BEARING AS
D9R, D9T
D9R, D9T
320 L
8E4360
IDLER AS
320 L
320 L
1129940
IDLER AS.
320 L
320 L
1129939
IDLER AS.
320 L
320 L
6Y2268
IDLER & BEARING AS
325 L, 325 LN, OEMS
325 L, 325 LN, OEMS