IMPELLER 1T244 1T0628 - Caterpillar

Illustration 1 g03492936
Top view
Typical example
Table 1
Specification for 376-1960 Upper Frame and 376-1955 Upper Frame
Item Qty Part Specification description
Before assembly, use black 5P-0960 Grease Cartridge in order to coat all the pin bores.
A - - Clearance between the pin end and the side of the cab must be kept over 10.0 mm (0.39 inch).
1 As required, use the following shims in order to adjust the maximum lateral clearance to 1.0 mm (0.04 inch):
1 364-4976 Shim Thickness is 0.5 mm (0.02 inch).
2 364-4974 Shim Thickness is 1.0 mm (0.04 inch).
1 364-4975 Shim Thickness is 2.0 mm (0.08 inch).
2 2 367-1432 Pin As Diameter is 139.850 0.040 mm (5.5059 0.0016 inch).
3 As required, use the following shims in order to adjust the maximum lateral clearance to 1.0 mm (0.04 inch):
2 208-1972 Shim Thickness is 0.5 mm (0.02 inch).
4 208-1973 Shim Thickness is 1.0 mm (0.04 inch).
2 208-1974 Shim Thickness is 2.0 mm (0.08 inch).
4 1 376-1877 Pin As Diameter is 139.850 0.040 mm (5.5059 0.0016 inch).
5 2 8T-4133 Nut Torque to 30 7 N m (266 62 lb in).