IMPELLER CONV 4563657 - Caterpillar

General
Use a seat belt if equipped. Wear a hard hat, safety glasses, respirator and other safety equipment as required by job conditions.Lower or block equipment and stop engine before servicing.Lower all equipment and set parking brake before leaving machine.Know the hand signals and who gives them.Do not smoke while fueling.Preparing to Operate
Report needed repairs.Make certain all safety guards and covers are secured in place.Clear personnel from machine and area.Keep operator's compartment clean.Clear obstacles from path of machine - note hazards such as wires and ditches.Start engine in well ventilated area.Be particularly careful on machines you do not usually operate.Move all controls to HOLD or NEUTRAL before starting engine.Mounting and Dismounting
Use grab irons and steps. Do not jump off machine.Lower all equipment and shut off engine before leaving machine.Checking Controls
Check all controls for freedom from binding before starting.Test governor control.Check condition and function of safety devices such as seat belts, lights, etc.Test steering clutches and brakes while moving slowly.Operating
Observe all gauges frequently - investigate improper readings.No riders.Look behind machine before backing.Stay clear of overhangs, electric wires, slide areas or other danger areas.Use extra caution in crossing side hills, ridges, ditches and other obstructions.Match speed with job conditions - do not coast.Stay safe distance from edge of cliff or overhang.Know your stopping distance at any given speed. Regulate travel speed accordingly.Keep machine under control - do not try to work machine over capacity.Stop tractor frequently at night - walk around and inspect tractor - stay alert.Report needed repairs noted during operation.