IMPELLER 4F7684 - Caterpillar

This is a 1.0-hour job
Note: If the reman transmission from the list is present and has not been updated, then additional 65.0 hours labor is allowed for removal and rework of the transmission.
Note: If the reman transmission was serviced per the program, then the transmission serial number must be included in the claim.
PARTS DISPOSITION
****Parts Stock****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
****Affected Product****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Park the machine on a hard, level surface and, referring to the Operation and Maintenance Manual, apply the parking brake, stop the engine, raise the hood and turn the battery disconnect switch to the ?off? position.
The list of affected transmission serial numbers is listed in Image1.1.1 along with the machine the transmission is installed in. Before proceeding, verify if the serial number of the 20R-6548 transmission installed in the truck is on the list. The serial number on the tag could have an extra digit such as "0" or "2" after the MJ8 prefix. Please use the last four numbers and letter of the serial number for verification. (Example: MJ82169A could be MJ802169A on the tag.) If the serial number of the transmission is not in the table, no further action is needed. If the serial number is listed, the transmission will need to be removed to have the torque converter bolts shown in Image1.1.3 inspected and tightened to specification.
Create a DSN - Product Health Service Request (SR) with Dealer expectation = Product Inquiry / Informational to report the transmission serial number and the repairs. Close the request at the dealership without submitting to Caterpillar.
Image1.1.1
Image1.1.2
TRANSMISSION REMOVAL:
Prior to rework, refer to UENR4227, Disassembly and Assembly, 735C,