IMPELLER 7B201 7B9877 - Caterpillar

Front of the Machine
Illustration 1 g01329517
Typical example of right frontIn order to lift the front of each side of the machine, use suitable tooling that can be mechanically secured in the raised position (25 ton minimum capacity). Place this tooling under the flat surface on the bottom of the casting which is used to mount the front suspension cylinder. The tooling should be placed near the welded joint between the casting and the front frame crossmember that is under the engine.In order to secure the front suspension cylinder on each side of the machine, use suitable tooling that can be mechanically secured in the raised position (10 ton minimum capacity). Place this tooling under the front suspension cylinder in order to prevent the extension of the cylinder.Rear of the Machine
Illustration 2 g01329619
Typical example of right rear (bottom view)In order to lift the rear of each side of the machine, use suitable tooling that can be mechanically secured in the raised position (25 ton minimum capacity). Place this tooling under a flat surface on the bottom of the differential housing. Note: Do not attempt to lift the rear of the machine between the two rear suspension cylinders.