7C3286 IMPELLER AS Caterpillar parts
Rating:
Alternative (cross code) number:
CA7C3286
7C-3286
7C3286
CA7C3286
7C-3286
7C3286
Weight: 0.37 pounds 0 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Water pump impeller 7C-3286 for CAT 3208 3160 marine engine parts pump 3N9009 2N3984 marine parts Accessories
MGxDhW 7C-3286 water pump impeller, suitable for CAT 3208 3160 marine engines, including 3N9009 and other pump parts. || It is a cooling system component, assisting liquid transportation and water pump operation. || It matches the corresponding engine, fits the installation, and meets the impeller usage requirements. || It can replace the same type of water pump impeller and related pump body structure. || The material adapts to the working environment and copes with the impeller working conditions.
MGxDhW 7C-3286 water pump impeller, suitable for CAT 3208 3160 marine engines, including 3N9009 and other pump parts. || It is a cooling system component, assisting liquid transportation and water pump operation. || It matches the corresponding engine, fits the installation, and meets the impeller usage requirements. || It can replace the same type of water pump impeller and related pump body structure. || The material adapts to the working environment and copes with the impeller working conditions.
WINGOGO Water Pump Impeller Repair Kit Replacement for Jabsco 920-0001-P Johnson 09-1028B-1 1028BT-1 Sherwood 18200K Yanmar 12760-42200
WINGOGO IMPELLER SIZE: Overall Diameter 2-9/16” (65mm) Width: 2” (50mm) Shaft: 5/8"(16mm) Neoprene, M Silhouette, 8 Blade, Spline Drive 7, Brass Insert. Impeller kit included impeller, gasket and O-ring. || Replaces for Jabsco 920-0001-P / 17937-0001-P, 1111-0001, 14868-0001, 31070-0051, 4325-0480, 5915-0001, 702-0001, 920-0001, 920-0008, 920-0009, 964-0001 || <p>Also compitable with Johnson 09-1028B-1 / 09-1028BT-1 Caterpillar 7C-3286, 3N1906 Cummins 650607 Oberdorfer 7441, C7441 Perkins 0460024 & 2488031 / 24880031 Sherwood 18200 / 18200K Vetus IMP00301 Pleasurecraft R061003E Detroit Diesel 5193602, 5196629, 5199148,Yanmar 127610-42200 12065-42310 123325-42020 Mercruiser 34765A1 Sierra 18-3077 Ancor 500106 Ford Lehman 920 Gray Marine 74306, 74340</p><p> </p> || WINGOGO neoprene flexible impellers suitable for marine water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes, work for fresh or sea water. Flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. || You should replace your flexible pump impellers at least once every year or sooner depending on the engine duty. It is one of the most vital components of the engine cooling system and should always be treated as such. Always carry spare impellers on board before boating sports. || To find the correct impeller kit for your application, it is VERY IMPORTANT to check pump type or impeller part number before purchase. You can leave us messages e.g. pump model, horsepower or year etc. if you're not sure. We’re pleasure to help you.
WINGOGO IMPELLER SIZE: Overall Diameter 2-9/16” (65mm) Width: 2” (50mm) Shaft: 5/8"(16mm) Neoprene, M Silhouette, 8 Blade, Spline Drive 7, Brass Insert. Impeller kit included impeller, gasket and O-ring. || Replaces for Jabsco 920-0001-P / 17937-0001-P, 1111-0001, 14868-0001, 31070-0051, 4325-0480, 5915-0001, 702-0001, 920-0001, 920-0008, 920-0009, 964-0001 || <p>Also compitable with Johnson 09-1028B-1 / 09-1028BT-1 Caterpillar 7C-3286, 3N1906 Cummins 650607 Oberdorfer 7441, C7441 Perkins 0460024 & 2488031 / 24880031 Sherwood 18200 / 18200K Vetus IMP00301 Pleasurecraft R061003E Detroit Diesel 5193602, 5196629, 5199148,Yanmar 127610-42200 12065-42310 123325-42020 Mercruiser 34765A1 Sierra 18-3077 Ancor 500106 Ford Lehman 920 Gray Marine 74306, 74340</p><p> </p> || WINGOGO neoprene flexible impellers suitable for marine water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes, work for fresh or sea water. Flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. || You should replace your flexible pump impellers at least once every year or sooner depending on the engine duty. It is one of the most vital components of the engine cooling system and should always be treated as such. Always carry spare impellers on board before boating sports. || To find the correct impeller kit for your application, it is VERY IMPORTANT to check pump type or impeller part number before purchase. You can leave us messages e.g. pump model, horsepower or year etc. if you're not sure. We’re pleasure to help you.
WINGOGO Water Pump Impeller Repair Kit Replacement for Jabsco 920-0001-P Johnson 09-1028B-1 1028BT-1 Sherwood 18200K Yanmar 12760-42200
WINGOGO IMPELLER SIZE: Overall Diameter 2-9/16” (65mm) Width: 2” (50mm) Shaft: 5/8"(16mm) Neoprene, M Silhouette, 8 Blade, Spline Drive 7, Brass Insert. Impeller kit included impeller, gasket and O-ring. || Replaces for Jabsco 920-0001-P / 17937-0001-P, 1111-0001, 14868-0001, 31070-0051, 4325-0480, 5915-0001, 702-0001, 920-0001, 920-0008, 920-0009, 964-0001 || <p>Also compitable with Johnson 09-1028B-1 / 09-1028BT-1 Caterpillar 7C-3286, 3N1906 Cummins 650607 Oberdorfer 7441, C7441 Perkins 0460024 & 2488031 / 24880031 Sherwood 18200 / 18200K Vetus IMP00301 Pleasurecraft R061003E Detroit Diesel 5193602, 5196629, 5199148,Yanmar 127610-42200 12065-42310 123325-42020 Mercruiser 34765A1 Sierra 18-3077 Ancor 500106 Ford Lehman 920 Gray Marine 74306, 74340</p><p> </p> || WINGOGO neoprene flexible impellers suitable for marine water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes, work for fresh or sea water. Flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. || You should replace your flexible pump impellers at least once every year or sooner depending on the engine duty. It is one of the most vital components of the engine cooling system and should always be treated as such. Always carry spare impellers on board before boating sports. || To find the correct impeller kit for your application, it is VERY IMPORTANT to check pump type or impeller part number before purchase. You can leave us messages e.g. pump model, horsepower or year etc. if you're not sure. We’re pleasure to help you.
WINGOGO IMPELLER SIZE: Overall Diameter 2-9/16” (65mm) Width: 2” (50mm) Shaft: 5/8"(16mm) Neoprene, M Silhouette, 8 Blade, Spline Drive 7, Brass Insert. Impeller kit included impeller, gasket and O-ring. || Replaces for Jabsco 920-0001-P / 17937-0001-P, 1111-0001, 14868-0001, 31070-0051, 4325-0480, 5915-0001, 702-0001, 920-0001, 920-0008, 920-0009, 964-0001 || <p>Also compitable with Johnson 09-1028B-1 / 09-1028BT-1 Caterpillar 7C-3286, 3N1906 Cummins 650607 Oberdorfer 7441, C7441 Perkins 0460024 & 2488031 / 24880031 Sherwood 18200 / 18200K Vetus IMP00301 Pleasurecraft R061003E Detroit Diesel 5193602, 5196629, 5199148,Yanmar 127610-42200 12065-42310 123325-42020 Mercruiser 34765A1 Sierra 18-3077 Ancor 500106 Ford Lehman 920 Gray Marine 74306, 74340</p><p> </p> || WINGOGO neoprene flexible impellers suitable for marine water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes, work for fresh or sea water. Flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. || You should replace your flexible pump impellers at least once every year or sooner depending on the engine duty. It is one of the most vital components of the engine cooling system and should always be treated as such. Always carry spare impellers on board before boating sports. || To find the correct impeller kit for your application, it is VERY IMPORTANT to check pump type or impeller part number before purchase. You can leave us messages e.g. pump model, horsepower or year etc. if you're not sure. We’re pleasure to help you.
For full view, you need register
Information:
Calibration Conditions
The chassis ECM must detect the following conditions before starting the calibration procedure:
The transmission oil temperature is above 65 °C (149 °F) and below 100 °C (212 °F).
The shift lever is in PARK.
The parking brakes are ENGAGED.
The retarding lever is in the OFF position.
The service brakes are RELEASED.
The engine speed is at low idle (approximately 700 rpm).
The transmission output speed (TOS) is 0 rpm.
There are no active clutch solenoid diagnostic codes.
There are no active transmission or torque converter speed sensor diagnostic codes.
There are no active transmission or torque converter temperature sensor diagnostic codes. If any of these conditions are not met during the calibration, the procedure is aborted and an error code is triggered. Procedure
Table 1
Required Tools
Part Number Description Qty
JEBD3003 Caterpillar Electronic Technician (ET) 1
Connect the communication cable between a laptop computer, equipped with a current version of Cat ET software, and the service connector of the truck.
Open Cat ET and choose Transmission ECM. On the top tool bar, click the tab labeled "Service". At the bottom of the drop-down box, click "Calibrations" and select "Transmission Fill Calibration". A "setup conditions" box will appear. When conditions are met, click "Next".
Illustration 1 g03051616
Setup Conditions For Transmission Fill Calibration
Follow the instructions that are provided. Approximately 15 minutes are required in order to complete the fill calibration.Note: During calibration, engine speed will be set automatically. Calibration will abort and error codes will appear in the Cat ET display screen if any of the listed calibration conditions are not meet.
When finished, a dialog box will in Cat ET will show whether the calibration was a Success or was Not Successful.Cat ET Error Codes
Illustration 2 g03051798
Example of Cat ET Calibration Error CodesDuring transmission fill calibration, Cat ET error codes can appear if a problem occurs. These error codes will be displayed as pop-up dialog boxes over the calibration instruction in Cat ET.
Table 2
Cat ET Error Codes for the Transmission Fill Calibration
Error Code Description Possible Causes / Recommended Actions
0001 ECM fault Problem with ECM. Check that the correct flash file is loaded into the ECM.
After the problem is resolved, retry the calibration.
0002 Active diagnostic present Troubleshoot and repair any clutch solenoid active code.
After the problem is resolved, retry the calibration.
0006 Calibration aborted by tool Technician stopped calibration or loss connection to Cat ET.
Ensure that a current version of Cat ET is used.
After the problem is resolved, retry the calibration.
0009 Calibration aborted by ECM Check for another active error code that indicates the cause of the problem and resolve the problem. A communication problem between the Chassis and Engine ECM or between Cat ET and the Chassis ECM can also cause this error.
Retry the calibration and ensure that calibration instructions are followed. If this error reoccurs after many attempts upon the same clutch, then troubleshoot that ECPC valve.
000B Calibration not supported
The chassis ECM must detect the following conditions before starting the calibration procedure:
The transmission oil temperature is above 65 °C (149 °F) and below 100 °C (212 °F).
The shift lever is in PARK.
The parking brakes are ENGAGED.
The retarding lever is in the OFF position.
The service brakes are RELEASED.
The engine speed is at low idle (approximately 700 rpm).
The transmission output speed (TOS) is 0 rpm.
There are no active clutch solenoid diagnostic codes.
There are no active transmission or torque converter speed sensor diagnostic codes.
There are no active transmission or torque converter temperature sensor diagnostic codes. If any of these conditions are not met during the calibration, the procedure is aborted and an error code is triggered. Procedure
Table 1
Required Tools
Part Number Description Qty
JEBD3003 Caterpillar Electronic Technician (ET) 1
Connect the communication cable between a laptop computer, equipped with a current version of Cat ET software, and the service connector of the truck.
Open Cat ET and choose Transmission ECM. On the top tool bar, click the tab labeled "Service". At the bottom of the drop-down box, click "Calibrations" and select "Transmission Fill Calibration". A "setup conditions" box will appear. When conditions are met, click "Next".
Illustration 1 g03051616
Setup Conditions For Transmission Fill Calibration
Follow the instructions that are provided. Approximately 15 minutes are required in order to complete the fill calibration.Note: During calibration, engine speed will be set automatically. Calibration will abort and error codes will appear in the Cat ET display screen if any of the listed calibration conditions are not meet.
When finished, a dialog box will in Cat ET will show whether the calibration was a Success or was Not Successful.Cat ET Error Codes
Illustration 2 g03051798
Example of Cat ET Calibration Error CodesDuring transmission fill calibration, Cat ET error codes can appear if a problem occurs. These error codes will be displayed as pop-up dialog boxes over the calibration instruction in Cat ET.
Table 2
Cat ET Error Codes for the Transmission Fill Calibration
Error Code Description Possible Causes / Recommended Actions
0001 ECM fault Problem with ECM. Check that the correct flash file is loaded into the ECM.
After the problem is resolved, retry the calibration.
0002 Active diagnostic present Troubleshoot and repair any clutch solenoid active code.
After the problem is resolved, retry the calibration.
0006 Calibration aborted by tool Technician stopped calibration or loss connection to Cat ET.
Ensure that a current version of Cat ET is used.
After the problem is resolved, retry the calibration.
0009 Calibration aborted by ECM Check for another active error code that indicates the cause of the problem and resolve the problem. A communication problem between the Chassis and Engine ECM or between Cat ET and the Chassis ECM can also cause this error.
Retry the calibration and ensure that calibration instructions are followed. If this error reoccurs after many attempts upon the same clutch, then troubleshoot that ECPC valve.
000B Calibration not supported
Parts impeller Caterpillar catalog:
7B9877
IMPELLER 7B201
Caterpillar
Caterpillar
7B8976
IMPELLER
Caterpillar
Caterpillar
7B5499
IMPELLER
Caterpillar
Caterpillar
7B0896
IMPELLER
Caterpillar
Caterpillar
7B0201
IMPELLER
Caterpillar
Caterpillar
6Y7192
IMPELLER-CONV
Caterpillar
Caterpillar
7R4601
IMPELLER
Caterpillar
Caterpillar
7R4486
IMPELLER ASSY
Caterpillar
Caterpillar
7L7580
IMPELLER A.
Caterpillar
Caterpillar
7H1719
IMPELLER-WATER
Caterpillar
Caterpillar
7G7538
IMPELLER-
Caterpillar
Caterpillar
7F2658
IMPELLER
Caterpillar
Caterpillar