IMPELLER 8J5479 - Caterpillar

Illustration 1 g03043756
Right side view
Table 1
Specification for 219-4711 Cylinder Block Gp and 370-9890 Cylinder Block Gp
Item Qty Part Specification Description
The camshaft bearings from the rear surface of the cylinder block are the following dimensions:
The oil holes must be aligned at the correct angle when the bearings are installed. Refer to Specifications, "Cylinder Block" for the correct angle.
A - - Distance is 2200.0 1.5 mm (86.61 0.06 inch).
B - - Distance is 1930.0 1.5 mm (75.98 0.06 inch).
C - - Distance is 1660.0 1.5 mm (65.35 0.06 inch).
D - - Distance is 1390.0 1.5 mm (54.72 0.06 inch).
E - - Distance is 1120.0 1.5 mm (44.09 0.06 inch).
F - - Distance is 850.0 1.5 mm (33.46 0.06 inch).
G - - Distance is 580.0 1.5 mm (22.83 0.06 inch).
H - - Distance is 310.0 1.5 mm (12.20 0.06 inch).
K - - Distance is 40.0 1.5 mm (1.57 0.06 inch).