INDICATOR 0947374 - Caterpillar

Illustration 1 g00992046
Inspection points for the service inspection (A) Ground level controls (B) Front lights (C) Cooling system (D) Engine (E) Hydraulic system (F) Air cleaner (G) Fuel tank (H) Power train hydraulic system (I) Steering hydraulic system (J) Articulating hitch and oscillating hitch (K) Rear axle (L) Frame and body (M) Automatic lubricant reservoir (if equipped) (N) Tires (O) Rollover Protective Structure
Illustration 2 g01805016
(A) Inspect the ground level controls for proper operation. Replace a damaged or worn engine shutdown switch (1). Replace a damaged or worn battery disconnect switch (2). (B) Inspect the lights for broken lamps, lenses, and proper operation. Replace broken lamps and lenses. (C) Inspect the cooling system for leaks, worn hoses, and debris. Repair any leaks and damaged hoses. Remove any debris that could block the air flow through the radiator.
Illustration 3 g03671520
(D) Inspect the engine. Use dipstick (3) to check the engine oil level. Check for oil leaks, coolant leaks, and exhaust leaks. Check the belts of the engine for proper tension and for good condition.
Illustration 4 g01805019
(E) Inspect the hydraulic system. Check for leaks, worn hoses, and damaged lines. Repair any leaks, worn hoses, and damaged lines.Check the level in hydraulic tank (4). Make sure that the filler cap is installed. Inspect the tank covers for damaged bolts, loose bolts, or missing bolts. Tighten loose bolts and replace missing bolts. Check the welds and mounting brackets for the hydraulic tank. Inspect the tank for leaks or for damage. If necessary, make repairs.
Illustration 5 g01805020
(F) Check engine air cleaner hood (5) for accumulated debris. If necessary, clean engine air cleaner hood (5). (G) Inspect the fuel tank. Make sure that the filler cap is installed correctly. Check the welds and mounting brackets for the fuel tank. Look for any leaks or damage to the fuel tank.
Illustration 6 g00992118
(H) Inspect the hydraulic system for torque converter and transmission (6). Check for leaks from the torque converter and from the transmission. Check for worn hoses and for damaged lines. Repair any leaks, worn hoses, and damaged lines.
Illustration 7 g00992119
(I) Inspect the steering hydraulic system for leaks, worn hoses, and damaged lines. If necessary repair leaks, worn hoses and damaged lines. Inspect the steering cylinders (7). (J) Inspect the articulating hitch and the oscillating hitch for wear, damage, and loose or missing bolts. Have the necessary repairs made. (K) Inspect the rear axle for leaks. Inspect the rear lights for damage.
Illustration 8 g01805021
(L) Inspect the frame and body. Check frame (9) for cracks or damage. Inspect body (8) for damage, wear, or distortion. Check for uneven wear of the body support pads. If equipped with an ejector body, check the ejector body and the tailgate for damage, wear and distortion.
Illustration 9 g03710006
(M) Inspect the automatic lubrication system (if equipped). Inspect tank (10) for leaks. Fill tank (10) with lubricant. For the correct procedure, refer to the Operation and Maintenance Manual, "Automatic Lubrication Grease Tank - Fill" for the machine that is being serviced. Check all of the grease fittings. (N) Inspect tires for cuts,