INDICATOR-VALVE 1975807 - Caterpillar

Engine: 3516C (S/N: NAM100-UP; KEN100-UP)Introduction
This Special Instruction provides the information in order to adjust the 3516C Power Module for either 50 Hz operation or 60 Hz operation.Important Safety Information
Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs.A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools in order to perform these functions properly.Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive. If a tool, a procedure, a work method or operating technique that is not specifically recommended by Caterpillar is used, you must ensure that it is safe for you and for other people to use. You should ensure that the product will not be damaged or the product will be made unsafe by the operation, lubrication, maintenance or the repair procedures that are used.Reference Information
The following publications can be used for reference.ReferenceSee EMCP3 Systems Operation Troubleshooting Testing and Adjusting, RENR7902 for more information.ReferenceSee Caterpillar Digital Voltage Regulator (CDVR) Systems Operation, RENR7941 for more information.ReferenceSee Systems Operation Testing & Adjusting, RENR4928 for more information.ReferenceSee Troubleshooting, RENR4929 for more information.Glossary
Cat Datalink (CDL) - The Cat Datalink (CDL) is a serial communications system