INDICATOR G 1P5510 - Caterpillar

Removal Procedure
Start By:
Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove".
Illustration 1 g01306599
Remove plug (1). Use a suitable pin to ensure that the crankshaft does not rotate.
Illustration 2 g01306601
Remove bolts (3) and damper (2).
Illustration 3 g01306602
Remove bolts (5) and retainer (6). Remove the adapter and pulley (4) as a unit.
Illustration 4 g01306603
Remove pulley (7) from adapter (8).Installation Procedure
Illustration 5 g01306603
Install adapter (8) to pulley (7).
Illustration 6 g01306602
Install the adapter and pulley (4) as a unit. Install retainer (6) and bolts (5). Tighten bolts (5) to a torque of 40 N m (30 lb ft). Turn bolts (5) an extra 120 degrees.
Illustration 7 g01306601
Install damper (2) and bolts (3). Tighten bolts (3) to a torque of 115 N m (85 lb ft).
Illustration 8 g01306599
Remove the suitable pin. Install plug (1).End By:
Install the fan. Refer to Disassembly and Assembly, "Fan - Install".