2144723 INDICATOR AS Caterpillar parts
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
Rating:
Alternative (cross code) number:
CA2144723
214-4723
2144723
CA2144723
214-4723
2144723
Weight: 0.03 pounds 0 kg.
BACKHOE LOADER,
Compatible equipment models: 2144723:
Number on catalog scheme:
16
For full view, you need register
Information:
Removal Procedure
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01019963
Remove bolts (2) and the washers.
Remove elbow assembly (1) and the O-ring seals from the engine oil cooler.
Remove bolts (7) from the core of engine oil cooler (3) .
Remove bolts (4) and the washers.
Remove bolts (8) and the washers.
Remove the core of engine oil cooler (3) and the O-ring seals from the oil filter base.
Loosen hose clamp (5) on hose assembly (6) . Remove engine oil cooler bonnet (10) and O-ring seal (9) .
Clean the cooler tube bundles in engine oil. Clean the core of engine oil cooler (3) with a rod that has a suitable diameter. Thoroughly clean the tube bundles. Check the oil cooler for cracks or leaks.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01019963
Remove bolts (2) and the washers.
Remove elbow assembly (1) and the O-ring seals from the engine oil cooler.
Remove bolts (7) from the core of engine oil cooler (3) .
Remove bolts (4) and the washers.
Remove bolts (8) and the washers.
Remove the core of engine oil cooler (3) and the O-ring seals from the oil filter base.
Loosen hose clamp (5) on hose assembly (6) . Remove engine oil cooler bonnet (10) and O-ring seal (9) .
Clean the cooler tube bundles in engine oil. Clean the core of engine oil cooler (3) with a rod that has a suitable diameter. Thoroughly clean the tube bundles. Check the oil cooler for cracks or leaks.
Cat SIS web machinery list:
Parts indicator Caterpillar catalog:
1872868
INDICATOR AS-AIR FILTER CHANGE
422E, 428E, 432E, 434E, 442E, 444E, 924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, D3G, D4G, D5G, IT28G, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
422E, 428E, 432E, 434E, 442E, 444E, 924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 930G, D3G, D4G, D5G, IT28G, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
2601336
INDICATOR GP-AIR FILTER CHANGE
414E, 416E, 420E, 430E, 450E
414E, 416E, 420E, 430E, 450E
2603122
INDICATOR-AIR FILTER SERVICE
414E, 416E, 420E, 430E, 450E
414E, 416E, 420E, 430E, 450E
1872866
INDICATOR AS-AIR FILTER CHANGE
414E, 416E, 422E
414E, 416E, 422E
2144717
INDICATOR AS
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
2733284
INDICATOR AS
420E, 430E, 432E, 434E, 442E, 444E, 450E
420E, 430E, 432E, 434E, 442E, 444E, 450E
3327333
INDICATOR GP-AIR FILTER CHANGE
416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 966F II
416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 966F II
2601347
INDICATOR GP-AIR FILTER CHANGE
422E, 428E, 432E, 434E, 442E, 444E
422E, 428E, 432E, 434E, 442E, 444E
2712351
INDICATOR AS
450E
450E
3180302
INDICATOR-FILTER CHANGE
416E, 430E
416E, 430E
2975346
INDICATOR AS
420E, 430E
420E, 430E
2975532
INDICATOR AS
420E, 430E
420E, 430E
2144717
INDICATOR AS
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
1872866
INDICATOR AS-AIR FILTER CHANGE
414E, 416E, 422E
414E, 416E, 422E
2603122
INDICATOR-AIR FILTER SERVICE
414E, 416E, 420E, 430E, 450E
414E, 416E, 420E, 430E, 450E
2601336
INDICATOR GP-AIR FILTER CHANGE
414E, 416E, 420E, 430E, 450E
414E, 416E, 420E, 430E, 450E
2415684
INDICATOR AS-AIR FILTER CHANGE
420D, 430D
420D, 430D
2515999
INDICATOR GP-RADIUS & ANGLE
TH355B, TH460B, TH560B
TH355B, TH460B, TH560B
1518367
INDICATOR
301.5, 302.5, 303.5, 304.5, TH210, TH215
301.5, 302.5, 303.5, 304.5, TH210, TH215
216B, 216B3, 226B, 226B3, 232B, 236D, 242B, 242D, 246D, 247B, 247B3, 257B, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, CB-44B, CB-54B
2601347
INDICATOR GP-AIR FILTER CHANGE
422E, 428E, 432E, 434E, 442E, 444E
422E, 428E, 432E, 434E, 442E, 444E
3327333
INDICATOR GP-AIR FILTER CHANGE
416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 966F II
416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 966F II
2733284
INDICATOR AS
420E, 430E, 432E, 434E, 442E, 444E, 450E
420E, 430E, 432E, 434E, 442E, 444E, 450E