INDICATOR AS 2660889 - Caterpillar

Engine Identification
Caterpillar engines are identified with serial numbers, with performance specification numbers, and with arrangement numbers. In some of the cases, modification numbers are used. These numbers are shown on the Serial Number Plate and the Information Plate that are mounted on the engine.Caterpillar dealers need these numbers in order to determine the components that were included with the engine. This permits accurate identification of replacement part numbers.Serial Number Plate
Illustration 1 g00798278
(1) Location of the Serial Number Plate The Serial Number Plate is on the left side of the cylinder block near the rear of the engine.
Illustration 2 g00123229
Typical Serial Number Plate
The following information is stamped on the Serial Number Plate: engine serial number, model and arrangement number.Information Plate
Illustration 3 g00798277
(1) Location of the Information Plate The Information Plate is on the left side top surface of the cylinder block in front of the front cylinder head.
Illustration 4 g00102789
Typical Information Plate
The following information is stamped on the Information Plate: engine's maximum altitude, horsepower, high idle rpm, full load rpm, fuel settings and other information.Identification of the Generator Set
Illustration 5 g01932074The identification plate for the generator set is located on the right side of the barrel of the generator.
Illustration 6 g00572840
Typical identification plate
When service is required, the information that is given on this plate should be used. The identification plate for the generator set includes the following information: serial number, model number and the rating of the generator set. The generator set consists of the engine and the generator. All pertinent generator data is also included on the plate in order to provide the information that is necessary to order parts.Output Lead Wiring
All generator lead wiring information can be found on a decal that is located on the side panel of the generator's terminal box. If the generator is equipped with a circuit breaker, the decal may be found on the sheet metal of the circuit breaker panel.European Union
Illustration 7 g01880193If equipped, this plate is positioned on the bottom left side of the plate for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines that are compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power (kW)____________________
Engine Power for Additional Engine (If Equipped) ____________________
Typical Operating Weight of the Machine for European Market (kg)____________________
Year of Construction____________________
Machine Type ____________________
Illustration 8 g01120192This plate is positioned on the bottom left side of the plate for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines that are compliant to 1998/42/EC, the following information is stamped on the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power (kW)____________________
Typical Operating Weight of the Machine for European Market (kg)____________________
Year____________________For the name and the address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.The PIN plate contains the