INDICATOR 3366609 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00919557
Install tube assembly (14) .
Illustration 2 g00919554
Install elbow (13) and install bolts (12) .
Illustration 3 g00919503
Install water pump assembly (10) .
Connect hose (11) .
Illustration 4 g00919501
Install bolts (9). Install bolts (8) .
Illustration 5 g00919499
Install hose (7) and tighten hose clamps (6) .
Illustration 6 g00923665
Install bonnet (7B) and install bolts (7C). Install bolts (7A). Tighten clamps (7D) .
Illustration 7 g00923662
Install clip (6C) and install bolts (6D) .
Install bolts (6B) on the clip.
Connect tube assembly (6A) .
Illustration 8 g00919498
Install alternator mounting bracket (5). Install bolts (4) .
Illustration 9 g00919497
Install bolts (3) .
Illustration 10 g00919496
Install belt tensioner (2). Install bolt (1). End By:
Install the fuel tank on the right side of the machine. Refer to Disassembly and Assembly, "Fuel Tank - Install".
Install the alternator. Refer to Disassembly and Assembly, "Atlernator - Remove and Install".