4S6998 INDICATOR Caterpillar parts
14E, 518, 613, 613B, 627, 631C, 657, 769, 816, 941, 950, 951B, 955H, 955K, 955L, 966C, 977K, 983, 992, D10, D4D, D5, D7F, D8H, D9G
Rating:
Alternative (cross code) number:
CA4S6998
4S-6998
4S6998
CA4S6998
4S-6998
4S6998
Weight: 0.01 pounds 0 kg.
LANDFILL COMPACTOR, WHEEL TRACTOR,
Compatible equipment models: 4S6998:
Number on catalog scheme:
13
For full view, you need register
Information:
Air shutoff valves must be tested and inspected in order to ensure proper operation.Inspect the air shutoff for damage of the following components that could prevent operation: housing, manual release knob, oil supply line and switches. After inspecting the air shutoff, use Cat Electronic Technician (ET) to trip the shutoff in order to ensure that the shutoff functions properly.
Start the engine and run at low idle.
Use Cat ET to override the parameters for the air shutoff and trip the air shutoff. Cat ET is the preferred method. If Cat ET is not available, the use of the emergency stop button is acceptable.
Inspect the air shutoff in order to ensure that the air shutoff has been tripped. The indicator on the air shutoff should point downward to the closed position. If the shutoff did not trip, see the Troubleshooting Guide.Note: Not to be used with butterfly valves.
Use a 1 inch wrench to reset the air shutoff by turning the operating shaft 180 degrees in the clockwise direction. Ensure that the arrow is pointing up to the open position.
Repeat Steps 1 through 4for a total of two successful tests.Note: Testing is only complete when the engine successfully passes all of the steps. Reset the air shutoff valve to the open position and clean up any spills that may have occurred.
Start the engine and run at low idle.
Use Cat ET to override the parameters for the air shutoff and trip the air shutoff. Cat ET is the preferred method. If Cat ET is not available, the use of the emergency stop button is acceptable.
Inspect the air shutoff in order to ensure that the air shutoff has been tripped. The indicator on the air shutoff should point downward to the closed position. If the shutoff did not trip, see the Troubleshooting Guide.Note: Not to be used with butterfly valves.
Use a 1 inch wrench to reset the air shutoff by turning the operating shaft 180 degrees in the clockwise direction. Ensure that the arrow is pointing up to the open position.
Repeat Steps 1 through 4for a total of two successful tests.Note: Testing is only complete when the engine successfully passes all of the steps. Reset the air shutoff valve to the open position and clean up any spills that may have occurred.
Cat SIS web machinery list:
Parts indicator Caterpillar catalog:
120G, 12G, 140G, 235, 518, 528, 561D, 571G, 572G, 627B, 637D, 814, 815, 816, 920, 930, 941, 950, 955K, 955L, 966C, 977K, 977L, 980B, 983B, D4D, D4E, D5, D5B, D6C, D6D, D7G
518, 528, 583H, 583K, 941, 951B, 955H, 955K, 955L, 977H, 977K, 983, D4D, D5, D8H, D8K, D9E
518, 561B, 561C, 621, 977L, D4E, D5, D6C
623, 627, 941, 951B, 955K, 955L, 977K, D4D
613, 666, D3, D6C
571G, 572G, D7F, D7G
518, 518C, 528, 528B, 530B, 571G, 572G, 583K, 931B, D4C, D6D, D7G, D8K
518, 528, 621, 631C, 641, 650B, 651, 657, 657B, 666, 768B, 769, 772, 773, 777, D9G, D9H
814, 815, 816, 920, 930, 950, 966C, 966R, 980B
815, 920, 930, 930R, 950, 966C
920, 930, 930R, 950
120G, 130G, 140G, 16G, 518, 518C, 528, 528B, 530B, 621, 621B, 627B, 633D, 637D, 641B, 815, 950, 966C, FB518
518, 528, 583H, 583K, 941, 951B, 955H, 955K, 955L, 977H, 977K, 983, D4D, D5, D8H, D8K, D9E
2952610
INDICATOR AS
D6K2
D6K2
2384C, 2484C, 559C, 579C, 953D, 963D, AP1000E, AP1055E, BG1000E, BG1055E, CD-54B, CW-34, D5R LGP, D6K, D6K LGP, D6K XL, D6K2 LGP, D6N, D6N LGP, D6N OEM, PL61
1910538
INDICATOR AS-SPEED
D3G, D4G, D5G
D3G, D4G, D5G
931B, 955H, 977H, D4D
6K2481
INDICATOR (Outer)
955K, 955L, 977K
955K, 955L, 977K
623, 627, 941, 951B, 955K, 955L, 977K, D4D
518, 561B, 561C, 621, 977L, D4E, D5, D6C
6K2012
INDICATOR
977K
977K