INDICATOR-AIR FILTER SERVICE 6I2933 - Caterpillar

Illustration 1 g02063216
Illustration 2 g02063217
There may be several specific safety signs on your engine. The exact location and a description of the signs are reviewed in this section. Please become familiar with all of the signs.Ensure that all of the signs are legible. Clean the signs or replace the signs if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap for cleaning the signs. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the signs. The signs that are loosened could drop off of the engine.Replace any sign that is damaged or missing. If a sign is attached to a part of the engine that is replaced, install a new sign on the replacement part. Your Caterpillar dealer can provide new signs.
Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
The safety signs that may be attached on the engine are illustrated and described below.Universal Warning (1)This warning label is located on cylinder 1 and cylinder 2.
g01370904
Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Hot Surface (2)This safety message is located on the following engine and cylinder valve covers: G3508 cylinder 5 and cylinder 6, G3512 cylinder 9 and cylinder 10 and G3516 cylinder 13 and cylinder 14.
g01372256
Hot surface! Do not touch!
Electrical Shock (3)This safety message is located on the following engine and cylinder valve covers: G3508 cylinder 5 and cylinder 6, G3512 cylinder 7 and cylinder 8 and G3516 cylinder 11 and cylinder 12.
g01372247
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Hot Surface (4)This safety message is located on the right side of the engine on the oil cooler. This message is also located on the left side of the engine near the middle of the engine on the crankcase cover.
g01384734
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Hot Pressurized Fluid (5)This message is typically located on the duplex oil filter and the duplex fuel filter.
g01124842
If the filter is changed during rapid air movement, an explosive vapor may be created. The explosive vapor may result in personal injury or in death.If rapid air movement exists, stop the engine in order to change the filter.