8B2355 INDICATOR (OIL) Caterpillar parts
D315
Rating:
Alternative (cross code) number:
CA8B2355
8B-2355
8B2355
CA8B2355
8B-2355
8B2355
Weight: 0.48 pounds 0 kg.
MARINE ENGINE,
This part in 4 request:
Show.
This information for suppliers only!
2023-03-25
2022-12-07
2022-11-07
2022-02-18
Compatible equipment models: 8B2355:
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 282-9962 Guide 2
B 255-2820 Camshaft Pilot 2
C 8T-3169 Crank As 1 Start By:
Remove the valve lifter.
Remove the turbochargers and supports.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g06093591
Disconnect harness assemblies (3). Remove bolts (1) and cover (2).
Illustration 2 g06094014
Remove bolts (4). Remove cover (5).
Illustration 3 g06094041
Remove bolts (6). Remove bolt (7). Remove spacer (8). Remove cam gear (9).
Illustration 4 g06341495
Remove bolts (10) and the washers. Remove retainer (11).
Illustration 5 g06341503
Remove bolts (12) and cover assembly (13).
Illustration 6 g01228274
Typical Example
Illustration 7 g01228276
Typical Example
Apply a thin coat of oil to Tooling (A) and Tooling (B). Install Tooling (A) and leave the bolts loose. Install Tooling (B). Tighten the bolts for Tooling (A). Install Tooling (C). Use Tooling (C) to rotate the camshaft. Rotate the camshaft to remove the camshaft.Note: The camshaft can be removed from either end of the engine.
Illustration 8 g06341519
Remove camshaft (14) halfway from the engine. Use a suitable lifting device to support camshaft (14). The weight of camshaft (14) on a C175-16 is approximately 77 kg (170 lb).The weight of camshaft (14) on a C175-20 is approximately 95 kg (210 lb). Remove the remaining portion of camshaft (14).
Illustration 9 g06341523
C175–20 camshaft
Remove eight nuts (15).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 282-9962 Guide 2
B 255-2820 Camshaft Pilot 2
C 8T-3169 Crank As 1 Start By:
Remove the valve lifter.
Remove the turbochargers and supports.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g06093591
Disconnect harness assemblies (3). Remove bolts (1) and cover (2).
Illustration 2 g06094014
Remove bolts (4). Remove cover (5).
Illustration 3 g06094041
Remove bolts (6). Remove bolt (7). Remove spacer (8). Remove cam gear (9).
Illustration 4 g06341495
Remove bolts (10) and the washers. Remove retainer (11).
Illustration 5 g06341503
Remove bolts (12) and cover assembly (13).
Illustration 6 g01228274
Typical Example
Illustration 7 g01228276
Typical Example
Apply a thin coat of oil to Tooling (A) and Tooling (B). Install Tooling (A) and leave the bolts loose. Install Tooling (B). Tighten the bolts for Tooling (A). Install Tooling (C). Use Tooling (C) to rotate the camshaft. Rotate the camshaft to remove the camshaft.Note: The camshaft can be removed from either end of the engine.
Illustration 8 g06341519
Remove camshaft (14) halfway from the engine. Use a suitable lifting device to support camshaft (14). The weight of camshaft (14) on a C175-16 is approximately 77 kg (170 lb).The weight of camshaft (14) on a C175-20 is approximately 95 kg (210 lb). Remove the remaining portion of camshaft (14).
Illustration 9 g06341523
C175–20 camshaft
Remove eight nuts (15).
Caterpillar parts catalog:
Parts indicator Caterpillar catalog:
7F1844
INDICATOR
D315
D315
D315, D326F, D330A, D342C, D397D
D315
8N5211
INDICATOR
D379B
D379B
7H9603
INDICATOR (Water)
3304, D320A, D342, D342C, D343, D353C, G3306, G342C
3304, D320A, D342, D342C, D343, D353C, G3306, G342C
3304, 3306
D320A, D330A, D342, D342C, D379, D379A, D4D, D9G
3918533
INDICATOR-PRESSURE
THREE60 PC
THREE60 PC
8F0248
INDICATOR (WATER)
D326F, D337, D364
D326F, D337, D364
3406, D348, D353C, D379, D379B, D398, D398B, D399, G399
2W1091
INDICATOR
3406, 815B, 826C, 834B, 943, 950B, 953, 963, 980C, 988B, 992C, D10
3406, 815B, 826C, 834B, 943, 950B, 953, 963, 980C, 988B, 992C, D10
2W1092
INDICATOR
3406, 815B, 826C, 834B, 950B, 980C, 988B, 992C, D10
3406, 815B, 826C, 834B, 950B, 980C, 988B, 992C, D10
2W1095
INDICATOR
3406, 815B, 826C, 834B, 950B, 980C, 988B, 992C, D10
3406, 815B, 826C, 834B, 950B, 980C, 988B, 992C, D10
7F1844
INDICATOR
D315
D315