10R1266 INJECTOR GP-FUEL Caterpillar parts
Rating:
Alternative (cross code) number:
CA10R1266
10R-1266
10R1266
CA10R1266
10R-1266
10R1266
Weight: 4 pounds 1 kg.
Related part:
2321183
INJECTOR GP-FUEL
10R1266
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1PCS Fuel Injector 10R-1266 For CAT 3412E 3408E Engine 5110B Excavator
CCXXMMYY Product Name: Fuel Injector || Product Number:10R-1266 || Application:For CAT 3412E 3408E Engine 5110B Excavator
CCXXMMYY Product Name: Fuel Injector || Product Number:10R-1266 || Application:For CAT 3412E 3408E Engine 5110B Excavator
Zuide 1X Fuel Injector 10R-1266 10R1266 For Caterpillar CAT 3408E Engine
Zuide Item Type:Fuel Injector || Part Number:10R-1266 10R1266 || Compatible with Caterpillar CAT 3408E Engine || Please make sure that the product pictures and partnumbers are correct to avoid the parts you purchase not being suitable for your machine || If you are not sure that the parts are suitable for your machine please take pictures of your originalparts for us and we will help you confirm
Zuide Item Type:Fuel Injector || Part Number:10R-1266 10R1266 || Compatible with Caterpillar CAT 3408E Engine || Please make sure that the product pictures and partnumbers are correct to avoid the parts you purchase not being suitable for your machine || If you are not sure that the parts are suitable for your machine please take pictures of your originalparts for us and we will help you confirm
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
D 1P-0510 Driver Group 1
E 138-9299(1) Oil Seal Tool 1
E FT-3171(2) Oil Seal Tool 1
F 139-0088(1) Seal Tool 1
F 325-5756(2) Seal Tool 1
(1) Use with a 19.1 mm (0.75 inch) shaft
(2) Use with a 25.4 mm (1.00 inch) shaft
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01021798
Clean water pump shaft (6) and the counterbore for lip seal (9) in housing (1).
Use Tooling (D) to install a new lip seal (9) in housing (1).Note: Install the seal with the part number on the metal face of the seal toward the housing. Ensure that the lip seal is flush with the front edge of the counterbore of the housing. Do not lubricate the lip seal. Use a press to install the lip seal. Do not install the lip seal by hand.
Install bearing assembly (8) on water pump shaft (6).
Place retainer (5) with “OUTSIDE” markings toward the gear end of water pump shaft (6).
Use a press and install gear (2) on water pump shaft (6).Note: Install gear (2) against bearing assembly (8).
Slide Tooling (E) over shaft (6). The tapered edge will be facing outward.
Install gear (2) and the water pump shaft into housing (1). Use care not to damage lip seal (9). Install bolts (3) that hold bearing retainer (5) to the housing.
Remove Tooling (E) from water pump shaft (6).
Use a press and Tooling (F) to install a new seal group (7) over shaft (6) and into housing (1). Ensure that the outer shell of the seal is fully seated in the housing.
Illustration 2 g06064850
Put impeller (4) in position on water pump shaft (6). Use a press and install impeller (4) on the water pump shaft.Note: Install impeller (4) so that Dimension (X) is within 11.71 0.2 mm (0.461 0.008 inch) from the mounting face of the housing.
Install O-ring seal (10) on the housing.End By:
Install the water pump.
Table 1
Required Tools
Tool Part Number Part Description Qty
D 1P-0510 Driver Group 1
E 138-9299(1) Oil Seal Tool 1
E FT-3171(2) Oil Seal Tool 1
F 139-0088(1) Seal Tool 1
F 325-5756(2) Seal Tool 1
(1) Use with a 19.1 mm (0.75 inch) shaft
(2) Use with a 25.4 mm (1.00 inch) shaft
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01021798
Clean water pump shaft (6) and the counterbore for lip seal (9) in housing (1).
Use Tooling (D) to install a new lip seal (9) in housing (1).Note: Install the seal with the part number on the metal face of the seal toward the housing. Ensure that the lip seal is flush with the front edge of the counterbore of the housing. Do not lubricate the lip seal. Use a press to install the lip seal. Do not install the lip seal by hand.
Install bearing assembly (8) on water pump shaft (6).
Place retainer (5) with “OUTSIDE” markings toward the gear end of water pump shaft (6).
Use a press and install gear (2) on water pump shaft (6).Note: Install gear (2) against bearing assembly (8).
Slide Tooling (E) over shaft (6). The tapered edge will be facing outward.
Install gear (2) and the water pump shaft into housing (1). Use care not to damage lip seal (9). Install bolts (3) that hold bearing retainer (5) to the housing.
Remove Tooling (E) from water pump shaft (6).
Use a press and Tooling (F) to install a new seal group (7) over shaft (6) and into housing (1). Ensure that the outer shell of the seal is fully seated in the housing.
Illustration 2 g06064850
Put impeller (4) in position on water pump shaft (6). Use a press and install impeller (4) on the water pump shaft.Note: Install impeller (4) so that Dimension (X) is within 11.71 0.2 mm (0.461 0.008 inch) from the mounting face of the housing.
Install O-ring seal (10) on the housing.End By:
Install the water pump.
Parts injector Caterpillar catalog:
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
10R1254
INJECTOR GP-FUEL
Caterpillar
Caterpillar
Caterpillar
10R1253
INJECTOR GP-FUEL
Caterpillar
Caterpillar
Caterpillar
Caterpillar