10R1280 INJECTOR GP-FUEL Caterpillar parts
3512B
Rating:
Alternative (cross code) number:
CA10R1280
10R-1280
10R1280
CA10R1280
10R-1280
10R1280
Weight: 6 pounds 3 kg.
MARINE ENGINE,
Related part:
2501308
INJECTOR GP-FUEL
10R1280
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
250-1308 10R-1280 2501308 10R1280 (2pcs) Common Rail Fuel Injector Suitable for Caterpillar CAT 3512B 3516B Engine
ZHLQUAMYTH Part Name: Common Rail Fuel Injector || Part Number: 250-1308 10R-1280 NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us! 10R1280 || Application: Suitable for Caterpillar CAT 3512B 3516B Engine || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice. || Your choice holds great significance for us. Not only do we sell products, but we also strive to provide "safety and performance assurance" for your beloved car. Your satisfaction is our eternal pursuit.We will offer the most sincere service.
ZHLQUAMYTH Part Name: Common Rail Fuel Injector || Part Number: 250-1308 10R-1280 NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us! 10R1280 || Application: Suitable for Caterpillar CAT 3512B 3516B Engine || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice. || Your choice holds great significance for us. Not only do we sell products, but we also strive to provide "safety and performance assurance" for your beloved car. Your satisfaction is our eternal pursuit.We will offer the most sincere service.
Fuel Injector 10R-1280 10R1280 for Caterpillar CAT 3512b 3516b Engine
MGHOME Part Number: 110R-1280 || Applicable models: Fit for Caterpillar CAT 3512b 3516b Engine || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
MGHOME Part Number: 110R-1280 || Applicable models: Fit for Caterpillar CAT 3512b 3516b Engine || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
Fuel Injector Fits for Caterpillar Engine 3512B 3516B 3508B 250-1308 10R-1280
GSHLGAO Part Number：250-1308 2501308 10R1280 10R-1280 || Application:Fits for Caterpillar 3512B 3516B Engine || Attention: The application information presented is intended for guidance purposes. It is recommended to verify the part number and conduct a comparison with the existing parts prior to making a purchase. Should you have any inquiries, please do not hesitate to reach out to us. || This product offers exceptional value with its reliable performance, ease of installation, and quick response time. It is a solid choice for those seeking a dependable and efficient solution.
GSHLGAO Part Number：250-1308 2501308 10R1280 10R-1280 || Application:Fits for Caterpillar 3512B 3516B Engine || Attention: The application information presented is intended for guidance purposes. It is recommended to verify the part number and conduct a comparison with the existing parts prior to making a purchase. Should you have any inquiries, please do not hesitate to reach out to us. || This product offers exceptional value with its reliable performance, ease of installation, and quick response time. It is a solid choice for those seeking a dependable and efficient solution.
For full view, you need register
Compatible equipment models: 10R1280:
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1854 Retaining Ring Pliers 1
B - Plate
51.0 by 102.0 by 6.0 mm (2.00 by 4.00 by 0.25 inch) 2
C 1P-1857 Retaining Ring Pliers 1
D - Tube
57.0 by 203.0 by 6.0 mm (2.25 by 8.00 by 0.25 inch) 1
E 1P-0510 Driver Gp 1
F 2S-3230 Bearing Lubricant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00925323
Install O-ring seals (54) on rotor cylinder (53). Install the rotor cylinder in motor housing (3). Orient pin (55) of the rotor cylinder with slot (56) in the motor housing.
Illustration 2 g00925216
Install O-ring seals (52) onto rotor cylinder (53).
Illustration 3 g01142958
Install rear end plate (45) on the shaft of rotor (48).
Install O-ring seal (46) over the shaft of the rotor.
Illustration 4 g01142960
Apply Tooling (F) to bearing (44). Install bearing (44) into rear end plate (45) and over the shaft of rotor (48).
Install rotor clamp nut (42) on the shaft of the rotor. Orient the shoulder of the nut toward the bearing.
Illustration 5 g01142961
Tighten rotor clamp nut (42) in order to obtain a clearance of 0.03 to 0.08 mm (0.001 to 0.003 inch) between the rear end plate (45) and rotor (48). Measure the clearance with a feeler gauge. Tighten hex socket head bolt (43) to secure rotor clamp nut (42). Measure the clearance again.
Illustration 6 g00925356
Install rotor (48) into motor housing (3). Align pin (57) into the slot of the rear end plate.
Illustration 7 g01142988
Thoroughly lubricate vanes (47) with SAE 10W oil and install vanes (47) into the rotor.
Install front end plate (50) onto the rotor. Align small hole (58) of front end plate onto rotor pin (59).
Illustration 8 g00925361
Install washers (51) over the shaft of the rotor onto the front end plate.
Illustration 9 g00925366
Apply Tooling (F) to bearing (49). Use Tooling (E) and a suitable press to install bearing (49) in the front end plate.
Illustration 10 g00925116
Install rotor pinion (40). Install bolt (41). Tighten the bolt to a torque of 120 N m (90 lb ft).
Illustration 11 g00925384
Install O-ring seal (60). Install cover (39) onto motor housing (3).
Illustration 12 g00925390
Illustration 13 g00925391
Apply Tooling (F) to bearing (33). Install bearing (33) and new retaining ring (32) onto drive shaft (17). Use Tooling (D) and a suitable press to complete the installation of the new retaining ring. Note: Do not reuse retaining ring (32).
Illustration 14 g01052459
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install retaining ring (31). Install bolt (23), lockwasher (24), and washer (25) into drive shaft (17). Apply Tooling (F) to bearing (26) and install bearing (26) into the drive shaft. Install bolt (23), lockwasher (24), and washer (25) into drive shaft (17). Apply Tooling (F) to bearing (26) and install the bearing into the drive shaft. Install driving clutch jaw (27), driven clutch jaw (28), spring (29), and cup (30) into the drive shaft. Install retaining ring (31). Thoroughly lubricate the drive assembly with SAE 10W
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1854 Retaining Ring Pliers 1
B - Plate
51.0 by 102.0 by 6.0 mm (2.00 by 4.00 by 0.25 inch) 2
C 1P-1857 Retaining Ring Pliers 1
D - Tube
57.0 by 203.0 by 6.0 mm (2.25 by 8.00 by 0.25 inch) 1
E 1P-0510 Driver Gp 1
F 2S-3230 Bearing Lubricant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00925323
Install O-ring seals (54) on rotor cylinder (53). Install the rotor cylinder in motor housing (3). Orient pin (55) of the rotor cylinder with slot (56) in the motor housing.
Illustration 2 g00925216
Install O-ring seals (52) onto rotor cylinder (53).
Illustration 3 g01142958
Install rear end plate (45) on the shaft of rotor (48).
Install O-ring seal (46) over the shaft of the rotor.
Illustration 4 g01142960
Apply Tooling (F) to bearing (44). Install bearing (44) into rear end plate (45) and over the shaft of rotor (48).
Install rotor clamp nut (42) on the shaft of the rotor. Orient the shoulder of the nut toward the bearing.
Illustration 5 g01142961
Tighten rotor clamp nut (42) in order to obtain a clearance of 0.03 to 0.08 mm (0.001 to 0.003 inch) between the rear end plate (45) and rotor (48). Measure the clearance with a feeler gauge. Tighten hex socket head bolt (43) to secure rotor clamp nut (42). Measure the clearance again.
Illustration 6 g00925356
Install rotor (48) into motor housing (3). Align pin (57) into the slot of the rear end plate.
Illustration 7 g01142988
Thoroughly lubricate vanes (47) with SAE 10W oil and install vanes (47) into the rotor.
Install front end plate (50) onto the rotor. Align small hole (58) of front end plate onto rotor pin (59).
Illustration 8 g00925361
Install washers (51) over the shaft of the rotor onto the front end plate.
Illustration 9 g00925366
Apply Tooling (F) to bearing (49). Use Tooling (E) and a suitable press to install bearing (49) in the front end plate.
Illustration 10 g00925116
Install rotor pinion (40). Install bolt (41). Tighten the bolt to a torque of 120 N m (90 lb ft).
Illustration 11 g00925384
Install O-ring seal (60). Install cover (39) onto motor housing (3).
Illustration 12 g00925390
Illustration 13 g00925391
Apply Tooling (F) to bearing (33). Install bearing (33) and new retaining ring (32) onto drive shaft (17). Use Tooling (D) and a suitable press to complete the installation of the new retaining ring. Note: Do not reuse retaining ring (32).
Illustration 14 g01052459
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install retaining ring (31). Install bolt (23), lockwasher (24), and washer (25) into drive shaft (17). Apply Tooling (F) to bearing (26) and install bearing (26) into the drive shaft. Install bolt (23), lockwasher (24), and washer (25) into drive shaft (17). Apply Tooling (F) to bearing (26) and install the bearing into the drive shaft. Install driving clutch jaw (27), driven clutch jaw (28), spring (29), and cup (30) into the drive shaft. Install retaining ring (31). Thoroughly lubricate the drive assembly with SAE 10W
Caterpillar parts catalog:
Parts injector Caterpillar catalog:
3508, 3508B, 3512, 3512B, 3516B, 854G, 992G, PM3508, PM3512, PM3516
3508, 3508B, 3512, 3512B, 3516, 3516B
3508, 3508B, 3512, 3512B, 3512C, 3516B, 3516C, 854G, 992G, PM3508, PM3512, PM3516
3508, 3508B, 3512, 3512B, 3516, 3516B
3508B, 3512B, 3516B, PM3508, PM3512, PM3516, PP3516
3508, 3508B, 3512, 3512B, 3516, 3516B, PM3508, PM3512, PM3516, PP3516
3508B, 3512B, 3516B, 854G, 992G, PM3508, PM3512, PM3516
3508, 3508B, 3512, 3512B, 3516B, 854G, 992G, PM3508, PM3512, PM3516
3508B, 3512B
3512B
3512B
2501310
INJECTOR GP-FUEL
3516B, 3516C
3516B, 3516C
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
657G, 772, AD45B, C18, PM-201
3516B
3512B, 3516B, PM3516
3512B
3512B