10R7236 INJECTOR GP-FUEL Caterpillar parts
Rating:
Alternative (cross code) number:
CA10R7236
10R-7236
10R7236
CA10R7236
10R-7236
10R7236
Weight: 5 pounds 2 kg.
Related part:
2490705
INJECTOR GP-FUEL
10R7236
R
You can buy:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
6X 10R7236 10R7636 Fuel Injector Fits for Caterpillar Diesel Engine C13 Excavator 352 349 355 Loader 980 980L 980M 982 982M
Yuubryczny Part Name:Fuel Injector || Part Number:10R7236 10R7636 || Application:Fits for Caterpillar Diesel Engine C13 Excavator 352 349 355 Loader 980 980L 980M 982 982M || Notice：Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us. || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice.
Yuubryczny Part Name:Fuel Injector || Part Number:10R7236 10R7636 || Application:Fits for Caterpillar Diesel Engine C13 Excavator 352 349 355 Loader 980 980L 980M 982 982M || Notice：Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us. || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice.
6X 10R7236 10R7636 Fuel Injector Fits for Caterpillar Diesel Engine C13 Excavator 352 349 355 Loader 980 980L 980M 982 982M
ZHLQUAMYTH Part Name:Fuel Injector || Part Number:10R7236 10R7636 || Application:Fits for Caterpillar Diesel Engine C13 Excavator 352 349 355 Loader 980 980L 980M 982 982M || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice. || Your choice holds great significance for us. Not only do we sell products, but we also strive to provide "safety and performance assurance" for your beloved car. Your satisfaction is our eternal pursuit.We will offer the most sincere service.
ZHLQUAMYTH Part Name:Fuel Injector || Part Number:10R7236 10R7636 || Application:Fits for Caterpillar Diesel Engine C13 Excavator 352 349 355 Loader 980 980L 980M 982 982M || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice. || Your choice holds great significance for us. Not only do we sell products, but we also strive to provide "safety and performance assurance" for your beloved car. Your satisfaction is our eternal pursuit.We will offer the most sincere service.
SHESWEET 6PCS Fuel Injector 10R-7236 10R7236 For Caterpillar CAT C13 349 352 355 982M 982 980L 980 980M
SHESWEET Part Name: 10R-7236 10R7236 Fuel Injector || Part Number: 10R-7236 10R7236 || Compatible with Caterpillar CAT C13 Engine || Compatible with Caterpillar CAT 349 352 355 Excavator || Compatible with Caterpillar CAT 982M 982 980L 980 980M Loader
SHESWEET Part Name: 10R-7236 10R7236 Fuel Injector || Part Number: 10R-7236 10R7236 || Compatible with Caterpillar CAT C13 Engine || Compatible with Caterpillar CAT 349 352 355 Excavator || Compatible with Caterpillar CAT 982M 982 980L 980 980M Loader
For full view, you need register
Information:
Dozing
Straight Dozing: If the blade digs in and the rear of the machine rises, raise the blade to continue even cut. When moving a heavy load causes travel speed to drop, shift to a lower speed and/or raise the blade slightly.When doing finishing or leveling work, a full blade handles easier than a partially loaded blade. Slot Dozing: This allows larger loads to be carried in front of the blade. It is used in stockpiling and high production bulldozing. Side-by-Side Dozing: Use when moving large quantities of loose material. Keep the blades close together and the machines parallel. Tilt Dozer Ditching: Tilt the blade and work with the low side in the ditch center. Level the blade when the required depth and slope are reached. Straight Dozer Ditching; Tilt the blade to cut shallow "V" ditches. For larger ditches, doze at right angles to the center line of the ditch. When the desired depth is reached, doze the length of ditch to smooth the sides and bottom. Angle Dozer Backfilling: Travel parallel to the ditch. Angle blade to backfill the material. Straight Dozer Backfilling: Push at a 90 degree angle to ditch.Land Clearing
1. Remove all dead limbs. Cut roots on side opposite direction of fall.2. Cut roots on sides parallel to direction of fall.3. Ease into the tree. Push in direction of fall with blade high. Build a earth ramp if higher contact is needed.4. Do not drive onto stump while tree is falling.
Back away immediately when tree starts to fall, to prevent possible injury.
Large Brush and Medium Size Trees: Contact the tree 300 to 400 mm (12 to 16 in) above the ground. Move forward while raising the blade. Brush Clearing: Lower the blade slightly into the ground and move forward. Raise the blade when the brush is out, to loosen the earth from the roots. Stump Removal: Raise the blade while pushing.Ripping
Use FIRST speed for most ripping operations. It is better to use additional shanks, where practical, rather than to increase speed.Always use center shank when ripping with one shank. If material breaks up satisfactorily, more shanks may be used.Cross rip only when necessary.When ripping for scraper loading, rip in same direction that scraper loads.Rip downhill whenever possible.
Do not turn or back the machine while shanks are in the ground. Twisting strain on the shanks and tips may cause failure.Inspect the ripper tips frequently for excessive wear.
Ripper Operating Hints
In most cases it is desirable to rip as deep as possible. Sometimes it is better to rip at partial depth and remove the material in its natural layers.Keep material on top of the unripped formation to cushion the machine and provide traction.When final material size must be relatively small, close spacing of passes is recommended.Packed Soil, Hard Pan, Clay, Shale or Cemented Gravel
Three shanks work well in these materials. Use as many shanks as possible to break material to desired size, without stalling or hanging up the machine.Rock with Fractures, Faults and Planes of Weakness
Use two shanks
Straight Dozing: If the blade digs in and the rear of the machine rises, raise the blade to continue even cut. When moving a heavy load causes travel speed to drop, shift to a lower speed and/or raise the blade slightly.When doing finishing or leveling work, a full blade handles easier than a partially loaded blade. Slot Dozing: This allows larger loads to be carried in front of the blade. It is used in stockpiling and high production bulldozing. Side-by-Side Dozing: Use when moving large quantities of loose material. Keep the blades close together and the machines parallel. Tilt Dozer Ditching: Tilt the blade and work with the low side in the ditch center. Level the blade when the required depth and slope are reached. Straight Dozer Ditching; Tilt the blade to cut shallow "V" ditches. For larger ditches, doze at right angles to the center line of the ditch. When the desired depth is reached, doze the length of ditch to smooth the sides and bottom. Angle Dozer Backfilling: Travel parallel to the ditch. Angle blade to backfill the material. Straight Dozer Backfilling: Push at a 90 degree angle to ditch.Land Clearing
1. Remove all dead limbs. Cut roots on side opposite direction of fall.2. Cut roots on sides parallel to direction of fall.3. Ease into the tree. Push in direction of fall with blade high. Build a earth ramp if higher contact is needed.4. Do not drive onto stump while tree is falling.
Back away immediately when tree starts to fall, to prevent possible injury.
Large Brush and Medium Size Trees: Contact the tree 300 to 400 mm (12 to 16 in) above the ground. Move forward while raising the blade. Brush Clearing: Lower the blade slightly into the ground and move forward. Raise the blade when the brush is out, to loosen the earth from the roots. Stump Removal: Raise the blade while pushing.Ripping
Use FIRST speed for most ripping operations. It is better to use additional shanks, where practical, rather than to increase speed.Always use center shank when ripping with one shank. If material breaks up satisfactorily, more shanks may be used.Cross rip only when necessary.When ripping for scraper loading, rip in same direction that scraper loads.Rip downhill whenever possible.
Do not turn or back the machine while shanks are in the ground. Twisting strain on the shanks and tips may cause failure.Inspect the ripper tips frequently for excessive wear.
Ripper Operating Hints
In most cases it is desirable to rip as deep as possible. Sometimes it is better to rip at partial depth and remove the material in its natural layers.Keep material on top of the unripped formation to cushion the machine and provide traction.When final material size must be relatively small, close spacing of passes is recommended.Packed Soil, Hard Pan, Clay, Shale or Cemented Gravel
Three shanks work well in these materials. Use as many shanks as possible to break material to desired size, without stalling or hanging up the machine.Rock with Fractures, Faults and Planes of Weakness
Use two shanks
Parts injector Caterpillar catalog:
10R3071
INJECTOR GP-FUEL
Caterpillar
Caterpillar
10R7239
INJECTOR GP-FUEL
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar