10R7951 INJECTOR GP-FUEL Caterpillar parts
Rating:
Alternative (cross code) number:
CA10R7951
10R-7951
10R7951
CA10R7951
10R-7951
10R7951
Weight: 0.88 pounds 0 kg.
Related part:
3264756
INJECTOR GP-FUEL
10R7951
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
ORTIZ 10R-7951 common rail style injector 10R 7951 suitable For cat 320D FM Excavator
Generic
Generic
1PCS Fuel injector 10R-7951 For Caterpillar CAT C6.4 C4.2 C6.6 Engine 323D SA 320D 320D LN 320D RR 323D 311D LRR 314D LCR 312D L 320D 313D 312D 314D CR Excavator
DEYAOLKL Product Name: Fuel injector || Product Number:10R-7951 || Application:For Caterpillar CAT C6.4 C4.2 C6.6 Engine 323D SA 320D 320D LN 320D RR 323D 311D LRR 314D LCR 312D L 320D 313D 312D 314D CR Excavator
DEYAOLKL Product Name: Fuel injector || Product Number:10R-7951 || Application:For Caterpillar CAT C6.4 C4.2 C6.6 Engine 323D SA 320D 320D LN 320D RR 323D 311D LRR 314D LCR 312D L 320D 313D 312D 314D CR Excavator
For full view, you need register
Information:
Removal Procedure
Illustration 1 g03364100
Disconnect the wiring harness assembly (not shown) from inlet manifold temperature sensor (1).
Remove Allen head bolt (2) from inlet manifold temperature sensor (1).
Remove inlet manifold temperature sensor (1) from inlet manifold temperature sensor housing (4).
Remove seal (3) (not shown).
If necessary, follow Step 5.a through Step 5.f in order to remove inlet manifold temperature sensor housing (7) and tube assembly (6).
Illustration 2 g03364176
Loosen nut (6) on tube assembly (7).
Remove bolt (5) from inlet manifold temperature sensor housing (7).
Disconnect tube assembly (7) from inlet manifold temperature sensor housing (4).
Remove inlet manifold temperature sensor housing (4) from inlet manifold (8).
Remove banjo bolt (10) and sealing washers (9) (not shown).
Remove tube assembly (7). Installation Procedure
Illustration 3 g03364176
If necessary, follow Step 1.a through Step 1.f in order to install the inlet manifold temperature sensor housing (4) and tube assembly (7).
Install new sealing washers (9) (not shown) and banjo bolt (10) to tube assembly (7).
Position tube assembly onto induction manifold (8) and loosely install banjo bolt (10).
Position inlet manifold temperature sensor housing (4) onto inlet manifold (8). Tighten nut (6) finger tight.
Install bolt (5). Tighten the bolt to a torque of 10 N m (89 lb in).
Tighten nut (6) to a torque of 10 N m (89 lb in).
Tighten banjo bolt (10) to a torque of 10 N m (89 lb in).
Illustration 4 g03364100
Install new seal (3) (not shown) to inlet manifold temperature sensor (1).
Install inlet manifold temperature sensor (1) to inlet manifold temperature sensor housing (4).
Install Allen head bolt (2). Tighten the Allen head bolt to a torque of 10 N m (89 lb in)
Illustration 1 g03364100
Disconnect the wiring harness assembly (not shown) from inlet manifold temperature sensor (1).
Remove Allen head bolt (2) from inlet manifold temperature sensor (1).
Remove inlet manifold temperature sensor (1) from inlet manifold temperature sensor housing (4).
Remove seal (3) (not shown).
If necessary, follow Step 5.a through Step 5.f in order to remove inlet manifold temperature sensor housing (7) and tube assembly (6).
Illustration 2 g03364176
Loosen nut (6) on tube assembly (7).
Remove bolt (5) from inlet manifold temperature sensor housing (7).
Disconnect tube assembly (7) from inlet manifold temperature sensor housing (4).
Remove inlet manifold temperature sensor housing (4) from inlet manifold (8).
Remove banjo bolt (10) and sealing washers (9) (not shown).
Remove tube assembly (7). Installation Procedure
Illustration 3 g03364176
If necessary, follow Step 1.a through Step 1.f in order to install the inlet manifold temperature sensor housing (4) and tube assembly (7).
Install new sealing washers (9) (not shown) and banjo bolt (10) to tube assembly (7).
Position tube assembly onto induction manifold (8) and loosely install banjo bolt (10).
Position inlet manifold temperature sensor housing (4) onto inlet manifold (8). Tighten nut (6) finger tight.
Install bolt (5). Tighten the bolt to a torque of 10 N m (89 lb in).
Tighten nut (6) to a torque of 10 N m (89 lb in).
Tighten banjo bolt (10) to a torque of 10 N m (89 lb in).
Illustration 4 g03364100
Install new seal (3) (not shown) to inlet manifold temperature sensor (1).
Install inlet manifold temperature sensor (1) to inlet manifold temperature sensor housing (4).
Install Allen head bolt (2). Tighten the Allen head bolt to a torque of 10 N m (89 lb in)
Parts injector Caterpillar catalog:
Caterpillar
20R2437
INJECTOR GP-FUEL
Caterpillar
Caterpillar
10R8998
INJECTOR GP-FUEL
Caterpillar
Caterpillar
10R6378
INJECTOR GP-FUEL
Caterpillar
Caterpillar
10R6377
INJECTOR GP-FUEL
Caterpillar
Caterpillar
10R5503
INJECTOR GP-FUEL
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
20R1259
INJECTOR GP-FUEL
Caterpillar
Caterpillar
Caterpillar
Caterpillar