1739267 INJECTOR GP-FUEL Caterpillar parts
3126, 3126B
Rating:
Alternative (cross code) number:
CA1739267
173-9267
1739267
CA1739267
173-9267
1739267
Weight: 2 pounds 1 kg.
TRUCK ENGINE,
Cross Reference:
CATERPILLAR
145-9360,
173-1012,
173-4566,
173-9267,
173-9268,
173-9379,
222-5965,
OR9348,
DELPHI
EX639348,
You can buy:
US$499.98
28 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Excavator Injector 196-1401 1961401 222-5967 2225967 10R-9238 0R-9349173-9267 compatible for 3126 Engine Parts Diesel Nozzle Assembly(173-9267)
EZCNFEPE Adapted to a variety of models, easy to install, directly replace the original car nozzle. || Improve dynamic performance, accelerate more rapidly, and upgrade driving experience. || The nozzle aperture design is scientific, and the fuel injection is more uniform and the combustion is more complete. || Improve engine idle stability and reduce jitter and noise. || Excavator Injector 196-1401 1961401 222-5967 2225967 10R-9238 0R-9349173-9267 compatible for 3126 Engine Parts Diesel Nozzle Assembly
EZCNFEPE Adapted to a variety of models, easy to install, directly replace the original car nozzle. || Improve dynamic performance, accelerate more rapidly, and upgrade driving experience. || The nozzle aperture design is scientific, and the fuel injection is more uniform and the combustion is more complete. || Improve engine idle stability and reduce jitter and noise. || Excavator Injector 196-1401 1961401 222-5967 2225967 10R-9238 0R-9349173-9267 compatible for 3126 Engine Parts Diesel Nozzle Assembly
IMELBUFF 173-9267 145-9360 173-1012 173-4566 173-9379 222-5965 Electronic Unit Fuel Injector for Caterpillar 3126 3126B Truck Engine
IMELBUFF ????Part Number: 173-9267 145-9360 173-1012 173-4566 173-9379 222-5965 || ????Engine Model: for Caterpillar 3126 3126B Truck Engine || ????Part Type: Electronic Unit Fuel Injector || ????Warm Tips: Please check your fuel injector part number before placing an order. Only the same part number can ensure that this fuel injector is fully compatible with your engine || ????Service: 6-months-warranty and 24 hour support for customer service. Please feel free to contact us by amazon email if you have any question with the product. Thank you for choosing IMELBUFF
IMELBUFF ????Part Number: 173-9267 145-9360 173-1012 173-4566 173-9379 222-5965 || ????Engine Model: for Caterpillar 3126 3126B Truck Engine || ????Part Type: Electronic Unit Fuel Injector || ????Warm Tips: Please check your fuel injector part number before placing an order. Only the same part number can ensure that this fuel injector is fully compatible with your engine || ????Service: 6-months-warranty and 24 hour support for customer service. Please feel free to contact us by amazon email if you have any question with the product. Thank you for choosing IMELBUFF
173-9267 1739267 Diesel Fuel Injector for Caterpillar 3126 3126B 3126E Engine
HIRINTOL ????Reference Part Number: 173-9267, 1739267. || ????Compatible Model: for Caterpillar 3126 3126B 3126E Diesel Engine || ????HIGH-Quality: Each diesel fuel injector is rigorously tested before leaving the factory, including idle test, load test, resistance test, seal test, fuel economy test. || ????Durability: Made of high strength metal and composite plastic, with the best erosion resistance and service life, providing long-lasting performance and reliability. || ????Plug and Play：With strict and precise process design to matches all specifications of the original parts, easy installation save time.
HIRINTOL ????Reference Part Number: 173-9267, 1739267. || ????Compatible Model: for Caterpillar 3126 3126B 3126E Diesel Engine || ????HIGH-Quality: Each diesel fuel injector is rigorously tested before leaving the factory, including idle test, load test, resistance test, seal test, fuel economy test. || ????Durability: Made of high strength metal and composite plastic, with the best erosion resistance and service life, providing long-lasting performance and reliability. || ????Plug and Play：With strict and precise process design to matches all specifications of the original parts, easy installation save time.
Number on catalog scheme:
1
For full view, you need register
Information:
(14)Governor
1. Remove tachometer drive cable (or cap) from the tachometer drive housing, and install an accurate tachometer.This adjustment should be made by an authorized dealer.2. See the Engine Specifications Chart for high and low idle settings.(15)Air Fuel Ratio Control
Slow engine response and low power may indicate a need for repair or adjustment by your Caterpillar dealer.(16)Engine Valve Lash
Adjust valves with the engine stopped and cold.If valve clearance is within .003 inch (0.07 mm) of the clearance given, adjustment is not required. If clearance is not within these limits, adjust the valves. There are two rocker arms (A), per cylinder. One rocker arm for the two exhaust valves and one rocker arm for the two inlet valves. Each pair of valves is connected by a bridge (B), which is actuated by the rocker arm. The valves in each pair are adjusted simultaneously by the adjusting screw (C), in the rocker arm. Each bridge is adjusted by adjusting screw (D). 1. Remove the flywheel housing timing hole cover (A).2. Remove the plug (B).3. Rotate the flywheel in direction of engine rotation.The engine can best be rotated by removing the flywheel housing timing hole cover and installing an engine turning tool, Caterpillar Part Number 9S9082. Contact your authorized dealer for information. 4. Install the timing bolt in the flywheel. This is the top bolt of the two bolts that secure the flywheel housing cover. 5. Clean the area around the valve cover. Remove the cover.6. Determine if No. 1 or No. 6 piston is on compression stroke. The cylinder on compression will have both the inlet and exhaust valves closed.Bridge Adjustment
Adjustment of the bridge will be necessary only after grinding the valves or other reconditioning of the cylinder head is done. Make an adjustment to the bridge using the following procedure.Valves must be fully closed.If the bridge was removed perform steps 1 and 2 that follow. If bridge was not removed, proceed to step 3.1. Put engine oil on the bridge dowel in the cylinder head and in the bore in the bridge.2. Install the bridge with the adjustment screw toward the exhaust manifold. 3. Back off adjusting screw several turns (counterclockwise), making sure it is not in contact with the valve stem.4. Firmly press straight down on the rocker arm above point of contact with bridge.5. Turn the adjusting screw clockwise until contact is made with the valve stem. Turn the adjusting screw an additional 30° (one-twelfth turn). 6. Hold the adjusting screw in this position and tighten the locknut to 22 3 lb. ft. (30 4 N m).7. Put engine oil at the point where the rocker arm makes contact with the bridge.After checking the bridge adjustment, make the valve lash adjustment.Valve Lash Adjustment:
1. With No. 1 piston at TDC on compression, check lash between the bridge and rocker arm on exhaust valves of cylinders 1, 3, 4, and 8 and inlet valves for cylinders 1, 2, 5, and 7. 2. To adjust, loosen valve adjusting
1. Remove tachometer drive cable (or cap) from the tachometer drive housing, and install an accurate tachometer.This adjustment should be made by an authorized dealer.2. See the Engine Specifications Chart for high and low idle settings.(15)Air Fuel Ratio Control
Slow engine response and low power may indicate a need for repair or adjustment by your Caterpillar dealer.(16)Engine Valve Lash
Adjust valves with the engine stopped and cold.If valve clearance is within .003 inch (0.07 mm) of the clearance given, adjustment is not required. If clearance is not within these limits, adjust the valves. There are two rocker arms (A), per cylinder. One rocker arm for the two exhaust valves and one rocker arm for the two inlet valves. Each pair of valves is connected by a bridge (B), which is actuated by the rocker arm. The valves in each pair are adjusted simultaneously by the adjusting screw (C), in the rocker arm. Each bridge is adjusted by adjusting screw (D). 1. Remove the flywheel housing timing hole cover (A).2. Remove the plug (B).3. Rotate the flywheel in direction of engine rotation.The engine can best be rotated by removing the flywheel housing timing hole cover and installing an engine turning tool, Caterpillar Part Number 9S9082. Contact your authorized dealer for information. 4. Install the timing bolt in the flywheel. This is the top bolt of the two bolts that secure the flywheel housing cover. 5. Clean the area around the valve cover. Remove the cover.6. Determine if No. 1 or No. 6 piston is on compression stroke. The cylinder on compression will have both the inlet and exhaust valves closed.Bridge Adjustment
Adjustment of the bridge will be necessary only after grinding the valves or other reconditioning of the cylinder head is done. Make an adjustment to the bridge using the following procedure.Valves must be fully closed.If the bridge was removed perform steps 1 and 2 that follow. If bridge was not removed, proceed to step 3.1. Put engine oil on the bridge dowel in the cylinder head and in the bore in the bridge.2. Install the bridge with the adjustment screw toward the exhaust manifold. 3. Back off adjusting screw several turns (counterclockwise), making sure it is not in contact with the valve stem.4. Firmly press straight down on the rocker arm above point of contact with bridge.5. Turn the adjusting screw clockwise until contact is made with the valve stem. Turn the adjusting screw an additional 30° (one-twelfth turn). 6. Hold the adjusting screw in this position and tighten the locknut to 22 3 lb. ft. (30 4 N m).7. Put engine oil at the point where the rocker arm makes contact with the bridge.After checking the bridge adjustment, make the valve lash adjustment.Valve Lash Adjustment:
1. With No. 1 piston at TDC on compression, check lash between the bridge and rocker arm on exhaust valves of cylinders 1, 3, 4, and 8 and inlet valves for cylinders 1, 2, 5, and 7. 2. To adjust, loosen valve adjusting
Caterpillar parts catalog:
Parts injector Caterpillar catalog:
3126, 3126B
3126B
3126, 3126B, 3126E
3126, 3126B
1471996
INJECTOR GP-FUEL
3126B
3126B
3126B
3126B
3126B
3126, 3126B, 3126E
3126B
3126B
3126B
3126B
3126, 3126B, 3126E
3126B
3126B
3126E
120H, 135H, 3126B, 3126E, 561N, 938G II, 953C, 963C, D5N, D6N, IT38G II
3126B, 3126E
3126B, 3126E
3126B, 3126E
3126B, 3126E