2113027 INJECTOR GP-FUEL Caterpillar parts
3406E, 3456, PM3456
Rating:
Alternative (cross code) number:
CA2113027
211-3027
2113027
CA2113027
211-3027
2113027
Weight: 5 pounds 2 kg.
GEN SET ENGINE, POWER MODULE,
Related part:
2113027
INJECTOR GP-FUEL
10R0959
R
Cross Reference:
CATERPILLAR
102-6230,
10R0958,
10R2780,
117-1146,
117-1148,
118-9035,
152-3680,
191-3004,
211-3024,
211-3027,
OR4118,
OR4668,
OR4893,
OR9258,
DELPHI
EX630958,
You can buy:
US$965.67
28 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
10R-0959 211-3027 10R0959 6pcs Fuel injector Replacement for CAT XQ400 XQ500 Engine SR4 3406E Wheel Loaders 836 988K
WZCPSM Product Name:Fuel Injector || Product Number:10R-0959 211-3027 10R0959 || Application:Replacement for CAT XQ400 XQ500 Engine SR4 3406E Wheel Loaders 836 988K || Note: Please verify your part number before purchasing. If you are unsure, please contact us. Thank you for your cooperation. || Tip: This product has fast response stable performance, high reliability, easy installation .It has been repeatedly tested and is of high quality and the most guaranteed.
WZCPSM Product Name:Fuel Injector || Product Number:10R-0959 211-3027 10R0959 || Application:Replacement for CAT XQ400 XQ500 Engine SR4 3406E Wheel Loaders 836 988K || Note: Please verify your part number before purchasing. If you are unsure, please contact us. Thank you for your cooperation. || Tip: This product has fast response stable performance, high reliability, easy installation .It has been repeatedly tested and is of high quality and the most guaranteed.
10R-0959 211-3027 10R0959 1pcs Fuel injector Replacement for CAT XQ400 XQ500 Engine SR4 3406E Wheel Loaders 836 988K
WZCPSM Product Name:Fuel Injector || Product Number:10R-0959 211-3027 10R0959 || Application:Replacement for CAT XQ400 XQ500 Engine SR4 3406E Wheel Loaders 836 988K || Note: Please verify your part number before purchasing. If you are unsure, please contact us. Thank you for your cooperation. || Tip: This product has fast response stable performance, high reliability, easy installation .It has been repeatedly tested and is of high quality and the most guaranteed.
WZCPSM Product Name:Fuel Injector || Product Number:10R-0959 211-3027 10R0959 || Application:Replacement for CAT XQ400 XQ500 Engine SR4 3406E Wheel Loaders 836 988K || Note: Please verify your part number before purchasing. If you are unsure, please contact us. Thank you for your cooperation. || Tip: This product has fast response stable performance, high reliability, easy installation .It has been repeatedly tested and is of high quality and the most guaranteed.
10R-0959 211-3027 10R0959 1pcs Fuel injector Compatible for CAT XQ400 XQ500 Engine SR4 3406E Wheel Loaders 836 988K
JPSMZSC Product Name:Fuel Injector || Part number:10R-0959 211-3027 10R0959 || Application:Compatible for CAT XQ400 XQ500 Engine SR4 3406E Wheel Loaders 836 988K || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm, you can leave us a message and provide your engine serial number and nameplate. || Tip: We mainly deal in all parts of the construction machinery series. Our product has stable performance, fast response, high reliability, and easy installation. High quality, most guaranteed. If you have any other requirements, please contact us.
JPSMZSC Product Name:Fuel Injector || Part number:10R-0959 211-3027 10R0959 || Application:Compatible for CAT XQ400 XQ500 Engine SR4 3406E Wheel Loaders 836 988K || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm, you can leave us a message and provide your engine serial number and nameplate. || Tip: We mainly deal in all parts of the construction machinery series. Our product has stable performance, fast response, high reliability, and easy installation. High quality, most guaranteed. If you have any other requirements, please contact us.
This part in 5 request:
Show.
This information for suppliers only!
2023-03-07
2019-02-07
2019-02-05
2017-11-23
2017-01-01
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 2113027:
Information:
Description
Illustration 1 g01277975
Location of the Field Coil Driver (1) Field Coil Driver Board
Illustration 2 g01277976
Assembly for the Field Coil Driver (2) Heat Shrink and Shroud (3) Field Coil Driver BoardThe Field Coil Driver Board (3) is located at the top right of the cabinet. The assembly for the Field Coil Driver consists of the following components: Field Coil Driver Board, heat sink and insulated gate bipolar transistors (IGBTs).The IGBTs for the field coil are connected to the DC bus. The field coils are used to generate magnetic fields in the flywheel. The field coils provide a lifting force on the rotor in order to prolong bearing life. Also, the field coils generate an electromotive force that enables the flywheel to spin during start-up. The field coils generate an electromotive force during discharge that provides energy to the bus.Removal Procedure
Refer to Systems Operation, Testing and Adjusting, RENR9988, "Internal Component Preremoval Steps (Flywheel Cabinet)" in order to shut down the system and gain access to internal components.
Electrostatic discharge can damage integrated circuits or semiconductors if you touch bus connector pins. When not in use, keep the module in its static-shield bag. Follow these guidelines when you handle any module:Touch a grounded object to discharge static potential.Wear an approved wrist-strap grounding device.Do not touch the bus connector or connector pins.Do not touch circuit components inside the module.If available, use a static-safe work station.
Illustration 3 g01278015
Diagram of the Field Coil Driver Board
Disconnect all connectors. Refer to Illustration 3. Verify each label for each connector for subsequent installation.
Loosen the left bolt that holds the assembly (3) to the top of the cabinet for the flywheel.
Loosen the right bolt that holds the assembly (3) to the top of the cabinet for the flywheel.
Remove the assembly (3) off the loosened bolts in order to remove the assembly (3) from the cabinet.Installation Procedure
Electrostatic discharge can damage integrated circuits or semiconductors if you touch bus connector pins. When not in use, keep the module in its static-shield bag. Follow these guidelines when you handle any module:Touch a grounded object to discharge static potential.Wear an approved wrist-strap grounding device.Do not touch the bus connector or connector pins.Do not touch circuit components inside the module.If available, use a static-safe work station.
Position the assembly (3) under the two loosened bolts at the top of the cabinet for the flywheel.
Install the assembly (3) on the mounting bolts.
Tighten the left bolt that holds the assembly (3) to the top of the cabinet for the flywheel.
Tighten the right bolt that holds the assembly (3) to the top of the cabinet for the flywheel.
Connect the connectors to the Field Coil Driver Board. Verify the labeling on each connector with the location of the connector.
Calibrate the Field Coil Driver. Refer to Systems Operation, Testing and Adjusting, RENR9988, "Flywheel Field Coil Current - Calibrate".
Illustration 1 g01277975
Location of the Field Coil Driver (1) Field Coil Driver Board
Illustration 2 g01277976
Assembly for the Field Coil Driver (2) Heat Shrink and Shroud (3) Field Coil Driver BoardThe Field Coil Driver Board (3) is located at the top right of the cabinet. The assembly for the Field Coil Driver consists of the following components: Field Coil Driver Board, heat sink and insulated gate bipolar transistors (IGBTs).The IGBTs for the field coil are connected to the DC bus. The field coils are used to generate magnetic fields in the flywheel. The field coils provide a lifting force on the rotor in order to prolong bearing life. Also, the field coils generate an electromotive force that enables the flywheel to spin during start-up. The field coils generate an electromotive force during discharge that provides energy to the bus.Removal Procedure
Refer to Systems Operation, Testing and Adjusting, RENR9988, "Internal Component Preremoval Steps (Flywheel Cabinet)" in order to shut down the system and gain access to internal components.
Electrostatic discharge can damage integrated circuits or semiconductors if you touch bus connector pins. When not in use, keep the module in its static-shield bag. Follow these guidelines when you handle any module:Touch a grounded object to discharge static potential.Wear an approved wrist-strap grounding device.Do not touch the bus connector or connector pins.Do not touch circuit components inside the module.If available, use a static-safe work station.
Illustration 3 g01278015
Diagram of the Field Coil Driver Board
Disconnect all connectors. Refer to Illustration 3. Verify each label for each connector for subsequent installation.
Loosen the left bolt that holds the assembly (3) to the top of the cabinet for the flywheel.
Loosen the right bolt that holds the assembly (3) to the top of the cabinet for the flywheel.
Remove the assembly (3) off the loosened bolts in order to remove the assembly (3) from the cabinet.Installation Procedure
Electrostatic discharge can damage integrated circuits or semiconductors if you touch bus connector pins. When not in use, keep the module in its static-shield bag. Follow these guidelines when you handle any module:Touch a grounded object to discharge static potential.Wear an approved wrist-strap grounding device.Do not touch the bus connector or connector pins.Do not touch circuit components inside the module.If available, use a static-safe work station.
Position the assembly (3) under the two loosened bolts at the top of the cabinet for the flywheel.
Install the assembly (3) on the mounting bolts.
Tighten the left bolt that holds the assembly (3) to the top of the cabinet for the flywheel.
Tighten the right bolt that holds the assembly (3) to the top of the cabinet for the flywheel.
Connect the connectors to the Field Coil Driver Board. Verify the labeling on each connector with the location of the connector.
Calibrate the Field Coil Driver. Refer to Systems Operation, Testing and Adjusting, RENR9988, "Flywheel Field Coil Current - Calibrate".
Caterpillar parts catalog:
Parts injector Caterpillar catalog:
3406E, 3456, 385B, 5090B, 621G, 623G, 627F, 627G, 651B, 657B, 735, 740, 824C, 824G, 824G II, 825G II, 826G II, 834G, 836G, 980G, 980G II, 988G, AD30, AD55, C-15, C-16, C16, D350E II, D400E II, D8R II,...
3406E, 3456, 385B, 5090B, 621G, 623G, 627F, 627G, 651B, 657B, 735, 740, 824C, 824G, 824G II, 825G II, 826G II, 834G, 836G, 980G, 980G II, 988G, AD30, AD55, C-15, C-16, C16, D350E II, D400E II, D8R II,...
3406E, 3456, C-18
3406E
3406E, 3456, D8R II
3508B, 3512B
2290196
INJECTOR GP-FUEL
3508B, 3512, 3512B, 3516B, SPF343, SPS343, SPT343
3508B, 3512, 3512B, 3516B, SPF343, SPS343, SPT343
3508B, 3512B
3508B, 3512B, 3516B, PM3508, PM3512, PM3516
3508B, 3512B, 3516B, PM3508, PM3512, PM3516, PP3516
3516B, PM3516
3508, 3508B, 3512, 3512B, 3512C, 3516B
3508, 3508B, 3512B, 3516B
3176C, 3196
3196, C-12, C12
3406E
3406E, 3456, C-18