2123462 INJECTOR GP-FUEL Caterpillar parts
345B, 345B L, C-10
Rating:
Alternative (cross code) number:
CA2123462
212-3462
2123462
CA2123462
212-3462
2123462
Weight: 4 pounds 2 kg.
EXCAVATOR, TRUCK ENGINE,
Related part:
2123462
INJECTOR GP-FUEL
10R0967
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Pmtihxu 212-3462 2123462 1X Fuel injector for CAT C-10 3176 3176C Engine 345B 345BL W345B Excavator
Pmtihxu Product Name: Fuel injector || Part number: 212-3462 2123462 || Condition: 100%New || for CAT C-10 3176 3176C Engine 345B 345BL W345B Excavator || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm, you can leave us a message and provide your engine serial number and nameplate.
Pmtihxu Product Name: Fuel injector || Part number: 212-3462 2123462 || Condition: 100%New || for CAT C-10 3176 3176C Engine 345B 345BL W345B Excavator || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm, you can leave us a message and provide your engine serial number and nameplate.
Diesel Fuel Injector Nozzle 212-3462 2123462 10R-0967 Compatible For Caterpillar CAT C10 Excvator Replacement Parts
BSZBAS OEM NO. : 212-3462 10R-0967 || Timely replacement of accessories can extend the service life of equipment || Improving overall efficiency after replacing parts || Please check the product pictures, accessories, and part numbers or OEM numbers before placing an order || If you are unsure, please feel free to ask us before making a purchase
BSZBAS OEM NO. : 212-3462 10R-0967 || Timely replacement of accessories can extend the service life of equipment || Improving overall efficiency after replacing parts || Please check the product pictures, accessories, and part numbers or OEM numbers before placing an order || If you are unsure, please feel free to ask us before making a purchase
dertgmlm 1PC Fuel Injector Fits for Caterpillar C10 C11 C12 C13 Diesel Engine Cat 345B W345B Excvator 212-3462 2123462
dertgmlm Part number: 212-3462 2123462 || Fits for Caterpillar Cat C10 Diesel Engine || Fits for Caterpillar Cat C11 Diesel Engine || Fits for Caterpillar Cat C12 Diesel Engine || Fits for Caterpillar Cat C13 Diesel Engine
dertgmlm Part number: 212-3462 2123462 || Fits for Caterpillar Cat C10 Diesel Engine || Fits for Caterpillar Cat C11 Diesel Engine || Fits for Caterpillar Cat C12 Diesel Engine || Fits for Caterpillar Cat C13 Diesel Engine
Number on catalog scheme:
2
For full view, you need register
Information:
Remove And Install Oil Pump
Start By:a. remove oil pan
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Bend the lock tab and remove bolt (1).
The oil pump idler gear (3) can fall off the pump when the pump is removed. Injury can be the result. To prevent injury, always hold idler gear on the pump when the pump is removed.
2. Bend the two tabs on locks (4) on the left hand side of the engine. Remove the four bolts (2) and (5) and remove the oil pump and suction bell as a unit. Be sure the idler gear (3) is engaged with the crankshaft gear and tabs on locks (4) on bolts (5) are not next to the oil pan gasket surface when bolts (2) and (5) are tightened. Install in reverse order.End By:a. install oil panDisassemble Oil Pump
Start By:a. remove oil pump
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Remove idler gear (2). Remove the bearing from the idler gear with tooling (B).2. Remove suction bell (1) and the bolt and the washer from the oil pump drive gear. 3. Remove the drive gear from the shaft with tooling (A).4. Remove the key from the pump shaft and bolts (3). 5. Remove body (8), two gears (7), the keys and spacer (4).6. Remove two shafts (5) and the gears.7. Remove bolts (6), the cover and the pressure relief valve. 8. Remove the bearings from the oil pump body assembly and the scavenge pump body assembly with tooling (B).Assemble Oil Pump
1. Install the bearings in the scavenge pump body assembly with tooling (B) and a press as follows:a. Put bearings (9) in position on the inside of the scavenge pump body assembly with the chamfer on the bearing toward the outside of the pump body. Install the bearing until it is 1.52 mm (.060 in) below the inside machined surface of the scavenge pump body assembly. Make sure the joints in the bearings are at an angle of 30° 15° from the center line through the bores in the scavenge pump body and toward the outlet passage of the pump. The outlet passage has a cavity between the bearing bores. 2. Install the bearings in oil pump body assembly with tooling (B) and a press as follows.a. Put bearings (10) in position on the inside of the oil pump body assembly with the chamfer on the bearings toward the outside of the pump body. Install the bearings until they are even with the outside of the pump at an angle of 30° 15° from the centerline through the bearing bores and toward the outlet passage of the pump. The outlet passage has a cavity between the bearing bores.3. Check the condition of the relief valve. Check the condition and specifications for all the parts of the oil pump before it is assembled. See the topic,
Start By:a. remove oil pan
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Bend the lock tab and remove bolt (1).
The oil pump idler gear (3) can fall off the pump when the pump is removed. Injury can be the result. To prevent injury, always hold idler gear on the pump when the pump is removed.
2. Bend the two tabs on locks (4) on the left hand side of the engine. Remove the four bolts (2) and (5) and remove the oil pump and suction bell as a unit. Be sure the idler gear (3) is engaged with the crankshaft gear and tabs on locks (4) on bolts (5) are not next to the oil pan gasket surface when bolts (2) and (5) are tightened. Install in reverse order.End By:a. install oil panDisassemble Oil Pump
Start By:a. remove oil pump
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Remove idler gear (2). Remove the bearing from the idler gear with tooling (B).2. Remove suction bell (1) and the bolt and the washer from the oil pump drive gear. 3. Remove the drive gear from the shaft with tooling (A).4. Remove the key from the pump shaft and bolts (3). 5. Remove body (8), two gears (7), the keys and spacer (4).6. Remove two shafts (5) and the gears.7. Remove bolts (6), the cover and the pressure relief valve. 8. Remove the bearings from the oil pump body assembly and the scavenge pump body assembly with tooling (B).Assemble Oil Pump
1. Install the bearings in the scavenge pump body assembly with tooling (B) and a press as follows:a. Put bearings (9) in position on the inside of the scavenge pump body assembly with the chamfer on the bearing toward the outside of the pump body. Install the bearing until it is 1.52 mm (.060 in) below the inside machined surface of the scavenge pump body assembly. Make sure the joints in the bearings are at an angle of 30° 15° from the center line through the bores in the scavenge pump body and toward the outlet passage of the pump. The outlet passage has a cavity between the bearing bores. 2. Install the bearings in oil pump body assembly with tooling (B) and a press as follows.a. Put bearings (10) in position on the inside of the oil pump body assembly with the chamfer on the bearings toward the outside of the pump body. Install the bearings until they are even with the outside of the pump at an angle of 30° 15° from the centerline through the bearing bores and toward the outlet passage of the pump. The outlet passage has a cavity between the bearing bores.3. Check the condition of the relief valve. Check the condition and specifications for all the parts of the oil pump before it is assembled. See the topic,
Caterpillar parts catalog:
Parts injector Caterpillar catalog:
16H, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 725, 972G II, C-10, C-12, CPT372, R1600G, W345B II
3176C, 3196, 480, 65E, 75D, 75E, 85E, 95E, C-10
345B, 345B L
345B, 345B L
3406E, C-15, C-16
3406E, C-15
3126B
3126B
1471996
INJECTOR GP-FUEL
3126B
3126B
3126, 3126B
3406E, C-15, C-16
