INJECTOR GP-FUEL 2290196 - Caterpillar

Power Takeoff Control Lever
Disengaged - Move the lever to position (2) to disengage and stop the power takeoff. Engaged - Move the lever to position (1) to engage the power takeoff. The power takeoff now operates.If equipped with a Machine Performance Panel (MPP), a reading of PTO speed may be displayed. Otherwise, the standard PTO speed (1000 rpm) is shown on the tachometer/speedometer (2050 rpm).PTO Implement Attachment
To avoid personal injury due to entanglement with rotating shaft, keep PTO master cover and all power drive system covers in place. Install PTO shaft guard when the system is not in use.
When operating PTO driven implements, center and lock the drawbar to avoid possible machine and/or implement damage. Attach implement to the machine before connecting the PTO.
PTO Connection
This machine is equipped with a 1000 rpm, 20 spline, 45 mm (1.75 in) diameter shaft.1. Remove two bolts (1) and PTO output shaft cover assembly (2).2. Connect the implement drive line to the PTO output shaft. Make sure the yoke is properly positioned and firmly locked.