2490702 INJECTOR GP-FUEL Caterpillar parts
C15
Rating:
Alternative (cross code) number:
CA2490702
249-0702
2490702
CA2490702
249-0702
2490702
Weight: 5 pounds 2 kg.
TRUCK ENGINE,
Related part:
2490702
INJECTOR GP-FUEL
10R3261
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
EXKATCC 1PCS Common Rail Fuel Injectors 249-0702 Fits for Caterpillar CAT 826H 824C Track Loaders C18 Engine
EXKATCC Product Name:Common Rail Fuel Injectors || Replaces Number:249-0702 || Application:Fits for Caterpillar CAT 826H 824C Track Loaders C18 Engine || Tips: Before purchasing, please carefully confirm whether the part number and compatible machine model match. || Notice: Our product is air freight express, striving to shorten the downtime of customer equipment
EXKATCC Product Name:Common Rail Fuel Injectors || Replaces Number:249-0702 || Application:Fits for Caterpillar CAT 826H 824C Track Loaders C18 Engine || Tips: Before purchasing, please carefully confirm whether the part number and compatible machine model match. || Notice: Our product is air freight express, striving to shorten the downtime of customer equipment
1-pcs 10R-3261 244-7702 249-0702 Fuel Injector Suitable for Caterpillar CAT Engine 3406E
OfkZynodor Including:1*Fuel Injector || Part Number:CA2530619, 253-0619, 2530619 || Fits for Caterpillar CAT Engine 3406E || Please make sure to carefully compare the photos and check the part numbers before making the purchase. If you are unable to confirm your engine model or part number, please leave us a message and we will assist you in confirming that the product you purchase is the one you need. || Your order is not merely a single purchase but the beginning of a cooperative journey, aiming to ensure the safe and smooth operation of your vehicle. We are proud to offer you reliable precision engineering components and unparalleled services.
OfkZynodor Including:1*Fuel Injector || Part Number:CA2530619, 253-0619, 2530619 || Fits for Caterpillar CAT Engine 3406E || Please make sure to carefully compare the photos and check the part numbers before making the purchase. If you are unable to confirm your engine model or part number, please leave us a message and we will assist you in confirming that the product you purchase is the one you need. || Your order is not merely a single purchase but the beginning of a cooperative journey, aiming to ensure the safe and smooth operation of your vehicle. We are proud to offer you reliable precision engineering components and unparalleled services.
Fits for Caterpillar CAT PM-200 Cold Planers C18 Engine 1PCS Common Rail Fuel Injectors 249-0702
KoovDem Part Number：249-0702 || Application:Fits for Caterpillar CAT PM-200 Cold Planers C18 Engine || Quality Assurance: Each injector undergoes factory testing for flow rate, pressure retention and leak prevention || Compatibility Guarantee: Matches original equipment specifications for seamless performance integration || Please verify your required part number before ordering. You may also provide your vehicle details for our compatibility verification service.
KoovDem Part Number：249-0702 || Application:Fits for Caterpillar CAT PM-200 Cold Planers C18 Engine || Quality Assurance: Each injector undergoes factory testing for flow rate, pressure retention and leak prevention || Compatibility Guarantee: Matches original equipment specifications for seamless performance integration || Please verify your required part number before ordering. You may also provide your vehicle details for our compatibility verification service.
Number on catalog scheme:
3
For full view, you need register
Compatible equipment models: 2490702:
Information:
Remove Water Pump
Start By:a. remove water temperature regulator and manifold1. Drain the coolant from the engine.2. Remove the alternator and alternator mounting group from the engine.
Typical Example3. Loosen the clamps on breather tube (1), and pull it back for clearance. 4. Remove bolt (2) from the cover on the side of the cylinder block. 5. Remove the three bolts that hold cover (3) to the water pump. Remove cover (3) from the water pump. 6. Remove the two bolts, and remove elbow (4) from bonnet (5). Remove the two bolts, and remove bonnet (5) from the water pump. It is not necessary to remove bolts (6). These bolts only hold the cover to the timing gear cover.7. Remove six long bolts (7) that hold the water pump to the timing gear cover. Remove water pump (8).Install Water Pump
1. Check the O-ring seals and gaskets, and make replacements if needed. 2. Make sure O-ring seal (9) is in position on the water pump. Put water pump (8) into position in the timing gear cover. Install the bolts that hold the water pump in place. 3. Make sure the gaskets are in place. Connect bonnet (5) to the water pump. Connect elbow (4) to the bonnet. 4. Make sure O-ring seal (10) is in position, and install cover (3) on the water pump. 5. Install bolt (2) on the cover on the side of the engine. 6. Put breather tube (1) in position, and install the clamps that hold it.7. Install the altenator mounting group and alternator on the engine.8. Install the water temperature regulator and manifold. See the topic Install Water Temperature Regulator and Manifold.9. Fill the cooling system to the correct level. See the Maintenance Manual.Disassemble & Assemble Water Pump
Start By:a. remove water pump The water pump seal can be replaced without removing the water pump from the engine.An intermittent leakage of a small amount of coolant from the hole in the water pump housing is not an indication of a water pump seal failure. This is required to provide lubrication for the seal. Replace the water pump seal only if a large amount of leakage or a constant flow of coolant is observed draining from the water pump housing. 1. Remove O-ring seal (3) from adapter (4). Remove the adapter from housing (7). Remove the O-ring seal from the outside of the adapter.2. Remove bolt (1) and washer (2). Use tooling (A) to remove impeller (6) from shaft (13).3. Remove spring and seal (5) from the shaft.4. Remove four bolts (16) from retainer (12) that hold the shaft assembly to the pump housing. Remove O-ring seal (18) from housing (7).5. Remove gear and shaft assembly (17) from the housing. Remove bolt (15), retainer (14), and retainer (12) from the shaft assembly.6. Use a press to remove shaft (13) from the gear. Remove bearing (9), spacer (10), and bearing (11) from the shaft.7. Remove lip-type seal (8) from the housing.8. Turn the housing over, and remove ceramic ring
Start By:a. remove water temperature regulator and manifold1. Drain the coolant from the engine.2. Remove the alternator and alternator mounting group from the engine.
Typical Example3. Loosen the clamps on breather tube (1), and pull it back for clearance. 4. Remove bolt (2) from the cover on the side of the cylinder block. 5. Remove the three bolts that hold cover (3) to the water pump. Remove cover (3) from the water pump. 6. Remove the two bolts, and remove elbow (4) from bonnet (5). Remove the two bolts, and remove bonnet (5) from the water pump. It is not necessary to remove bolts (6). These bolts only hold the cover to the timing gear cover.7. Remove six long bolts (7) that hold the water pump to the timing gear cover. Remove water pump (8).Install Water Pump
1. Check the O-ring seals and gaskets, and make replacements if needed. 2. Make sure O-ring seal (9) is in position on the water pump. Put water pump (8) into position in the timing gear cover. Install the bolts that hold the water pump in place. 3. Make sure the gaskets are in place. Connect bonnet (5) to the water pump. Connect elbow (4) to the bonnet. 4. Make sure O-ring seal (10) is in position, and install cover (3) on the water pump. 5. Install bolt (2) on the cover on the side of the engine. 6. Put breather tube (1) in position, and install the clamps that hold it.7. Install the altenator mounting group and alternator on the engine.8. Install the water temperature regulator and manifold. See the topic Install Water Temperature Regulator and Manifold.9. Fill the cooling system to the correct level. See the Maintenance Manual.Disassemble & Assemble Water Pump
Start By:a. remove water pump The water pump seal can be replaced without removing the water pump from the engine.An intermittent leakage of a small amount of coolant from the hole in the water pump housing is not an indication of a water pump seal failure. This is required to provide lubrication for the seal. Replace the water pump seal only if a large amount of leakage or a constant flow of coolant is observed draining from the water pump housing. 1. Remove O-ring seal (3) from adapter (4). Remove the adapter from housing (7). Remove the O-ring seal from the outside of the adapter.2. Remove bolt (1) and washer (2). Use tooling (A) to remove impeller (6) from shaft (13).3. Remove spring and seal (5) from the shaft.4. Remove four bolts (16) from retainer (12) that hold the shaft assembly to the pump housing. Remove O-ring seal (18) from housing (7).5. Remove gear and shaft assembly (17) from the housing. Remove bolt (15), retainer (14), and retainer (12) from the shaft assembly.6. Use a press to remove shaft (13) from the gear. Remove bearing (9), spacer (10), and bearing (11) from the shaft.7. Remove lip-type seal (8) from the housing.8. Turn the housing over, and remove ceramic ring
Caterpillar parts catalog:
Parts injector Caterpillar catalog:
385C, 385C FS, 385C L, 631G, 637G, 834H, 836H, 986H, 988H, C15, CX31-C15I, D9T, TH35-C15I
365C, 365C L, 583T, 621G, 623G, 627G, 657E, 657G, 735, 740, 770, 824H, 825H, 826H, 980H, AD30, C15, CX31-C15I, D8R, D8T, R2900G, TH35-C15I
7C2072
INJECTOR GP-FUEL
214B, 3116
214B, 3116
3920708
INJECTOR AS-FUEL
3.4B IOPU, 311F LRR, C3.4B, CB-44B, CB-54B, CD-54B, CW-14
3.4B IOPU, 311F LRR, C3.4B, CB-44B, CB-54B, CD-54B, CW-14
120K, 120K 2, 12K, 140G, 140K, 140K 2, 140M, 160K, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 525C, 535C, 545C, 57...
2625341
INJECTOR GP-FUEL
C15, TH35-C15T
C15, TH35-C15T
