INJECTOR GP-FUEL 2490709 - Caterpillar

Warning Signs and Labels
There may be several specific safety signs on your engine. Please take the time to familiarize yourself with the safety signs.Make sure that you can read all safety signs. Clean or replace these if you cannot read the words or see the pictures. When cleaning the labels use a cloth, water and soap. Do not use solvents, gasoline, etc, to clean safety signs. The use of solvents, gasoline, etc, could loosen the sign's adhesive and cause the sign to fall off.You must replace a label if it is damaged, missing or cannot be read. If a label is attached to a part, and that part is replaced, make sure a new label is installed on the replaced part. See your Caterpillar dealer for new labels.Do not operate or work on the engine unless you have read and understand the instructions and warnings in this Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Consult your Caterpillar dealer for replacement manuals. Proper care is your responsibility.Ether, Unit Injectors, High Pressure, Read Manual
The Ether, Unit Injectors, High Pressure, Read Manual warning label is located on the valve cover.
Ether, Unit Injectors, High Pressure, Read Manual warning label.The following paragraphs describe the warnings that are depicted on the warning label.Ether
The engine is equipped with an air inlet heater for cold weather starting. Do not spray aerosol types of starting aids such as ether into the air inlet. Such use could result in an explosion and personal injury.Unit Injectors
This engine uses high voltage to the unit injectors. Disconnect the unit injector connector to prevent personal injury. Do not come in contact with the injector harness connector while the engine is operating.High Pressure
High pressure fluid spray can inject fluid into the body resulting in serious injury or death. Always use a piece of cardboard or a board to detect leaks. Never use your hand.Read Manual
Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death.Consult any Caterpillar dealer for replacement labels. Proper care is your responsibility.General Hazard Information
Attach a DO NOT OPERATE or similar warning tag to the start switch or controls before performing maintenance or repairing the engine. These tags, SEHS7332, are available from your Caterpillar dealer. Do not allow unauthorized personnel on, around or in the vehicle when maintenance or repair is being performed.* Tampering with the engine installation or with the vehicle OEM wiring installation can be dangerous and could result in personal injury or death and/or engine damage.* When operating the engine in an enclosed area, vent the exhaust to th outside.* If the engine is not running, do NOT release the secondary or parking brake systems unless the vehicle is blocked or restrained.* Wear a hard hat, protective glasses, hearing protection and other protective equipment as required by job conditions.* Do