2605656 INJECTOR GP-FUEL Caterpillar parts
320D
Rating:
Alternative (cross code) number:
CA2605656
260-5656
2605656
CA2605656
260-5656
2605656
Weight: 0.88 pounds 0 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Fuel Injector 260-5656 2605656 326-4756 3264756 10R7951 301-7756 3017756 Compatible For 320D 320DL E320D E320DL Excavator Parts
GDXLEYOR With the ability to adjust the fuel injection, according to the engine condition changes, automatically adjust the fuel injection to ensure stable working performance. || In order to prevent impurities in the fuel from clogging the nozzle, it is usually equipped with a filter or cleaning mechanism to keep the injection system unblocked. || Diesel nozzles usually work under high pressure, which can ensure that fuel can be atomized quickly and evenly, improving combustion efficiency || The porous or axial pin structure has good sealing and wear resistance. || Fuel Injector 260-5656 2605656 326-4756 3264756 10R7951 301-7756 3017756 Compatible For 320D 320DL E320D E320DL Excavator Parts
GDXLEYOR With the ability to adjust the fuel injection, according to the engine condition changes, automatically adjust the fuel injection to ensure stable working performance. || In order to prevent impurities in the fuel from clogging the nozzle, it is usually equipped with a filter or cleaning mechanism to keep the injection system unblocked. || Diesel nozzles usually work under high pressure, which can ensure that fuel can be atomized quickly and evenly, improving combustion efficiency || The porous or axial pin structure has good sealing and wear resistance. || Fuel Injector 260-5656 2605656 326-4756 3264756 10R7951 301-7756 3017756 Compatible For 320D 320DL E320D E320DL Excavator Parts
4PCS 2605656 Fuel Injector 260-5656 Suitable for Caterpillar CAT C4.2 C6.3 Engine 320D Excavator
ZHLQUAMYTH Part Name:Fuel Injector || Part Number:260-5656 2605656 || Application:Suitable for Caterpillar CAT C4.2 C6.3 Engine 320D Excavator || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice. || Your choice holds great significance for us. Not only do we sell products, but we also strive to provide "safety and performance assurance" for your beloved car. Your satisfaction is our eternal pursuit.We will offer the most sincere service.
ZHLQUAMYTH Part Name:Fuel Injector || Part Number:260-5656 2605656 || Application:Suitable for Caterpillar CAT C4.2 C6.3 Engine 320D Excavator || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice. || Your choice holds great significance for us. Not only do we sell products, but we also strive to provide "safety and performance assurance" for your beloved car. Your satisfaction is our eternal pursuit.We will offer the most sincere service.
4PCS 2605656 Fuel Injector 260-5656 Suitable for Caterpillar CAT C4.2 C6.3 Engine 320D Excavator
Yuubryczny Part Name:Fuel Injector || Part Number:260-5656 2605656 || Application:Suitable for Caterpillar CAT C4.2 C6.3 Engine 320D Excavator || Notice：Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us. || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice.
Yuubryczny Part Name:Fuel Injector || Part Number:260-5656 2605656 || Application:Suitable for Caterpillar CAT C4.2 C6.3 Engine 320D Excavator || Notice：Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us. || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice.
This part in 10 request:
Show.
This information for suppliers only!
2022-01-11
2022-01-11
2022-01-11
2022-01-11
2022-01-11
2022-01-11
2022-01-11
2022-01-11
2022-01-11
2022-01-11
For full view, you need register
Compatible equipment models: 2605656:
Information:
The regulator test determines problems in the following components: the regulator, the field winding and the exciter diodes. The regulator test does not cover all failures.
Illustration 1 g00649573
Connect a variable power supply and two multimeters to the alternator. The alternator is completely assembled for this test. Set one multimeter as a voltmeter. Set the other multimeter as an ammeter. The setup is shown in Illustration 1.
Set the variable power supply to 0 volts. Slowly raise the power supply until the ammeter indicates a current draw.
Measure the voltage. Record the result as the "Turn On" voltage.Expected Result: The voltage is approximately 27 volts.Results:OK - The voltage is approximately 27 volts. Go on to step 4.NOT OK - The voltage is not approximately 27 volts. The regulator has failed. Replace the regulator. STOP.
The regulator remains on. Measure the current. Record the result as the field current.Expected Results: M1 Series Alternators ... 3.08 to 3.15 amperes HDB Series Alternators ... 3.26 to 3.59 amperesResults:OK - The current is within tolerance. Go on to step 5.NOT OK - The current is below tolerance or the current is 0 amps. The field winding is open or the regulator is open. Refer to Testing and Adjusting, "Field Winding - Test" in order to determine if the field winding is open. If the field winding is open, replace the field winding. If the field winding is normal, the regulator is open. Replace the regulator. STOP.NOT OK - The current is above tolerance. The field winding has a short circuit. Replace the field winding. Go on to step 5.
Divide the "Turn On" voltage by the rotor field winding resistance. Refer to Specifications, "Alternator" for the rotor field winding resistance. Record the result as the field current. Compare the current that was calculated above with the current that was measured in step 4.
The power supply remains at the "Turn On" voltage. Slowly raise the voltage until the ammeter reads 0 amps. Record the result as the "Turn Off" voltage.
Subtract the "Turn On" voltage from the "Turn Off" voltage.Expected Result: The difference is 2 volts or less.Results:OK - The difference is 2 volts or less. The regulator is normal. STOP.NOT OK - The difference is greater than 2 volts. The regulator has failed. Replace the regulator. STOP.
Illustration 1 g00649573
Connect a variable power supply and two multimeters to the alternator. The alternator is completely assembled for this test. Set one multimeter as a voltmeter. Set the other multimeter as an ammeter. The setup is shown in Illustration 1.
Set the variable power supply to 0 volts. Slowly raise the power supply until the ammeter indicates a current draw.
Measure the voltage. Record the result as the "Turn On" voltage.Expected Result: The voltage is approximately 27 volts.Results:OK - The voltage is approximately 27 volts. Go on to step 4.NOT OK - The voltage is not approximately 27 volts. The regulator has failed. Replace the regulator. STOP.
The regulator remains on. Measure the current. Record the result as the field current.Expected Results: M1 Series Alternators ... 3.08 to 3.15 amperes HDB Series Alternators ... 3.26 to 3.59 amperesResults:OK - The current is within tolerance. Go on to step 5.NOT OK - The current is below tolerance or the current is 0 amps. The field winding is open or the regulator is open. Refer to Testing and Adjusting, "Field Winding - Test" in order to determine if the field winding is open. If the field winding is open, replace the field winding. If the field winding is normal, the regulator is open. Replace the regulator. STOP.NOT OK - The current is above tolerance. The field winding has a short circuit. Replace the field winding. Go on to step 5.
Divide the "Turn On" voltage by the rotor field winding resistance. Refer to Specifications, "Alternator" for the rotor field winding resistance. Record the result as the field current. Compare the current that was calculated above with the current that was measured in step 4.
The power supply remains at the "Turn On" voltage. Slowly raise the voltage until the ammeter reads 0 amps. Record the result as the "Turn Off" voltage.
Subtract the "Turn On" voltage from the "Turn Off" voltage.Expected Result: The difference is 2 volts or less.Results:OK - The difference is 2 volts or less. The regulator is normal. STOP.NOT OK - The difference is greater than 2 volts. The regulator has failed. Replace the regulator. STOP.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts injector Caterpillar catalog:
320D, 320D FM, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 320D
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
3508, 3508B, 3512, 3512B, 3516, 3516B
3848666
INJECTOR GP-FUEL
C175-16
C175-16
3846499
INJECTOR & MTG GP-DEF
C175-16
C175-16
325D L, 329D L
3809889
INJECTOR GP-FUEL
586C, C9.3
586C, C9.3