INJECTOR AS 3762680 - Caterpillar

(1) Clean the paint from bracket (1) at location (A) to make a ground, and install lamp (2) with nut (3), lockwasher and washer to bracket (1). (2) Clean the paint from the plates on each side of the boom and from the bottom of bracket (1) to make a ground. Install brackets (1) and lamps (2). Connect the ends of wire assembly (3) to lamps (2) and fasten the wire to bracket (1) with clips (4) and with straps (5) to the existing tubes. (3) Connect the end of wire assembly (6) to lamp (2) on the left side of the boom. Install clip (7) and fasten wire assembly (6) to the existing tube and hose with straps (8). (4) Connect the other end of wire assembly (6) to the dark green wire of existing wiring harness (9); install fuse (10) for the light switch.