INJECTOR GP-FUEL 3920219 - Caterpillar

Factory passwords are required to perform the following functions:
Clear logged events
Program the engine monitoring system.
Program the Rated Fuel Position.
Program the cooling system.
Program the Total Fuel.
Program the Total Hours.
Program the Direct Fuel Control Mode.The following information is required to obtain Caterpillar Factory Passwords:
Table 1
Caterpillar Dealer Code        
Name        
Address        
Phone Number        Note: Record logged events before you remove the Electronic Control Module (ECM).The following information is required to obtain factory passwords.
Table 2
Engine hours        Note: Engine hours do not include service meter hours.View the factory password screen on the Caterpillar Electronic Technician (ET). Record the following information:
Table 3
Cat ET Serial Number        
Engine Serial Number        
Primary ECM Serial Number        
Secondary ECM Serial Number        
Total Tattletale        
Reason Code        
Other parameters        Injector Codes
Table 4
Injector 1        
Injector 2        
Injector 3        
Injector 4        
Injector 5        
Injector 6        
Injector 7        
Injector 8        
Injector 9        
Injector 10        
Injector 11        
Injector 12