INJECTOR AS-FUEL 4545091 - Caterpillar

1. Put identification marks on the wires for the starting motor as to their location on the starting motor. Disconnect all wires (3) from the starting motor.2. Use two persons to remove the starting motor. The weight of the starting motor is 29 kg (64 lb.). Remove three bolts (1) and starting motor (2) from the flywheel housing. Check the condition of the gasket for the starting motor. If necessary, make a replacement.3. Put the gasket and starting motor (2) in position on the flywheel housing, and install bolts (1) to hold it.4. Connect all wires (3) to the starting motor.