4P9510 INJECTOR GP-FUEL Caterpillar parts
3176, 75
Rating:
Alternative (cross code) number:
CA4P9510
4P-9510
4P9510
CA4P9510
4P-9510
4P9510
Weight: 4 pounds 2 kg.
CHALLENGER, TRUCK ENGINE,
Related part:
4P9510
INJECTOR GP-F -A
0R4203
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$395.00
28 Feb 2020
-: -
CAT 4P9510 Remanufactured Fuel Injector for Engine C10/C12/3176/3196 (Renewed)
4P9510 Remanufactured injector for engine Caterpillar C10/C12/3176/3196 || Meets OEM Specs for Fit and Performance. 6 months warranty or 1500 hours || This is a remanufactured item 4P9510 injector || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
4P9510 Remanufactured injector for engine Caterpillar C10/C12/3176/3196 || Meets OEM Specs for Fit and Performance. 6 months warranty or 1500 hours || This is a remanufactured item 4P9510 injector || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
$395.00
06 Jun 2021
US: QUALITY PARTS
CAT 4P9510 Remanufactured Injector for Engine C10/C12/3176/3196
G&T Engine Parts 4P9510 Remanufactured injector for engine Caterpillar C10/C12/3176/3196 || Meets OEM Specs for Fit and Performance || 6 months warranty or 1500 hours. || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts 4P9510 Remanufactured injector for engine Caterpillar C10/C12/3176/3196 || Meets OEM Specs for Fit and Performance || 6 months warranty or 1500 hours. || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01140735
Disconnect sensor (4) and harness assembly (6) from valve cover base (5).
Remove bolt (1) and the clip that holds the harness assembly.
Disconnect harness assemblies (3).
Remove bolts (2), the washers, and the springs.
Remove valve cover base (5) and the seal. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01140735
Illustration 3 g01061297
Position the seal and valve cover base (5) on the cylinder head.
Install the springs, the washers, and bolts (2). Tighten bolts (2) in a numerical sequence.
Connect harness assemblies (3).
Install the clip and bolt (1) that holds the harness assembly.
Connect harness assembly (6) to valve cover base (5). Tighten the bolts to a torque of 6 1 N m (53 9 lb in).
Connect sensor (4) to valve cover base (5). End By:
Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01140735
Disconnect sensor (4) and harness assembly (6) from valve cover base (5).
Remove bolt (1) and the clip that holds the harness assembly.
Disconnect harness assemblies (3).
Remove bolts (2), the washers, and the springs.
Remove valve cover base (5) and the seal. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01140735
Illustration 3 g01061297
Position the seal and valve cover base (5) on the cylinder head.
Install the springs, the washers, and bolts (2). Tighten bolts (2) in a numerical sequence.
Connect harness assemblies (3).
Install the clip and bolt (1) that holds the harness assembly.
Connect harness assembly (6) to valve cover base (5). Tighten the bolts to a torque of 6 1 N m (53 9 lb in).
Connect sensor (4) to valve cover base (5). End By:
Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Caterpillar parts catalog:
Parts injector Caterpillar catalog:
4P1420
INJECTOR GP-FUEL
3176, 75
3176, 75
3176, 75
1047900
INJECTOR GP-F
3176, 75C
3176, 75C
1062233
INJECTOR GP-F-
3176, 75C
3176, 75C
3176, 75
4P1420
INJECTOR GP-FUEL
3176, 75
3176, 75
320 L, 918F, IT28F, RT100
214B, 3114, 3116, E240C
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 308E2 CR
3776958
INJECTOR GP-FUEL
272D, 272D XHP, 299D, 299D XHP, 910K, 914K
272D, 272D XHP, 299D, 299D XHP, 910K, 914K
3508, 3512
1168800
INJECTOR GP-FUEL
3176B, 75C, R1700 II
3176B, 75C, R1700 II
1062233
INJECTOR GP-F-
3176, 75C
3176, 75C
1047900
INJECTOR GP-F
3176, 75C
3176, 75C
3176B, 75C