7E5645 INJECTOR GP-FUEL Caterpillar parts
3606, 3608, 3612, 3616
Rating:
Alternative (cross code) number:
CA7E5645
7E-5645
7E5645
CA7E5645
7E-5645
7E5645
Weight: 24 pounds 11 kg.
GEN SET-MILITARY, MARINE ENGINE,
Related part:
7E5645
INJECTOR GP-FUEL
0R6130
R
Compatible equipment models: 7E5645:
Number on catalog scheme:
1
For full view, you need register
Information:
All 3300 Direct Injection Engines With Scroll Fuel SystemThe new FT1585 Plate can be made for use during replacement of worn governor spring guides in 8N2500 (Rear) Governor Housings on the above engines. The plate is used to control the depth to which the spring guide is installed in the governor housing. Use 17 gauge mild steel to fabricate the FT1585 Plate. Dimensions for the plate are given in Illustration 1. Use the procedure that follows to install a new spring guide.
Illustration 1. FT1585 Plate specifications.1. Use 1P529 Handle, 1P462 Plate, and a hydraulic press to remove the 8N2499 Spring Guide from the governor housing. There must be a hole in the press to permit the guide to be removed. See Illustration 2.
Illustration 2. Removal of spring guide.2. Use the FT1585 Plate and a hydraulic press to put the new 8N2499 Spring Guide in position in the governor housing. Push the 8N2500 Housing down on to the spring guide. The FT1585 Plate controls the depth to which the spring guide is installed into the governor housing. See Illustration 3.3. The location of the end of the spring guide must be 1.40 .25 mm (.055 .010") below the surface of the housing as shown.
Illustration 3. Installation of spring guide.
Illustration 4. Correct installation depth.
Illustration 1. FT1585 Plate specifications.1. Use 1P529 Handle, 1P462 Plate, and a hydraulic press to remove the 8N2499 Spring Guide from the governor housing. There must be a hole in the press to permit the guide to be removed. See Illustration 2.
Illustration 2. Removal of spring guide.2. Use the FT1585 Plate and a hydraulic press to put the new 8N2499 Spring Guide in position in the governor housing. Push the 8N2500 Housing down on to the spring guide. The FT1585 Plate controls the depth to which the spring guide is installed into the governor housing. See Illustration 3.3. The location of the end of the spring guide must be 1.40 .25 mm (.055 .010") below the surface of the housing as shown.
Illustration 3. Installation of spring guide.
Illustration 4. Correct installation depth.
Caterpillar SIS machinery equipment:
Caterpillar SIS
3606 GENERATOR, INDUSTRIAL, LOCOMOTIVE, AND MARINE 8RB00001-UP »
7E-5645
INJECTOR GP-FUEL
3608 GENERATOR, INDUSTRIAL, LOCOMOTIVE AND MARINE January 1998 to Current 6MC00001-UP »
7E-5645
INJECTOR GP-FUEL
3612 GENERATOR,INDUSTRIAL,LOCOMOTIVE AND MARINE JANUARY 1998 TO CURRENT 9RC00001-UP »
7E-5645
INJECTOR GP-FUEL
3616 Generator, Industrial and Locomotive 1PD00001-UP »
7E-5645
INJECTOR GP-FUEL
Cat SIS web machinery list:
Parts injector Caterpillar catalog:
3606, 3608, 3612, 3616
6I4401
INJECTOR GP-FUEL
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
4W4288
INJECTOR GP-FUEL
3606, 3608, 3616
3606, 3608, 3616
3606, 3608, 3612, 3616
1683554
INJECTOR GP-FUEL
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
2882403
INJECTOR GP-FUEL
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8
3606, 3608, 3612, 3616
2249089
INJECTOR GP-FUEL
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
7C7445
INJECTOR GP-FUEL
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
140M, 140M 2, 160M, 160M 2, 2390, 2391, 2491, 2590, 330D, 330D FM, 330D L, 330D MH, 336D, 336D L, 336D2, 336D2 L, 340D L, 340D2 L, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2, 627G, 637D, 6...
160M, 330D, 330D FM, 330D L, 330D LN, 330D MH, 521, 522, 532, 541, 551, 552, 627G, 637G, 814F II, 815F II, 816F II, 973C, C9, CX31-C9I, M330D, TH31-E61
24H, 3408E, 3412E, 631E, 633E II, 637E, 651E, 657E, 769D, 771D, 773D, 775D, 834B, 836, 844, 988F II, 990 II, D10R, D9R, PM-565
3508, 3512, 3516
584, C7
3508, 3508B, 3512, 3516, 3516B
3126E
2470C, 553C, 559, 924H, 924HZ, 953D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS-64, CS-68B, CS-74, CS-74B, CS-78B, D6K, D6K LGP, D6K XL, PL61, R1300G II
3109609
INJECTOR GP-FUEL
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR
24H, 3412E, 5110B, 631D, 631E, 633E II, 637E, 651E, 657E, 769C, 769D, 771D, 773B, 775E, 834B, 836, 844, 988B, 990, 990 II, 992C, D10N, D10R, D8L, D9L, D9N, PM-565B