7E6010 INJECTOR GP-FUEL Caterpillar parts
3176
Rating:
Alternative (cross code) number:
CA7E6010
7E-6010
7E6010
CA7E6010
7E-6010
7E6010
TRUCK ENGINE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$434.50
24 Nov 2021
US: QUALITY PARTS
CAT 7E6010 Remanufactured Injector for Engine C10/C12/3176/3196
G&T Engine Parts 7E6010 Remanufactured injector for engine Caterpillar C10/C12/3176/3196 || Meets OEM Specs for Fit and Performance || Remanufactured injector for engine Caterpillar || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts 7E6010 Remanufactured injector for engine Caterpillar C10/C12/3176/3196 || Meets OEM Specs for Fit and Performance || Remanufactured injector for engine Caterpillar || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 7E6010:
Information:
Specification
Table 1
"Relief Valve (Swing) - Test and Adjust"
Machine Settings Engine Speed
Engine speed dial "10"
AEC switch OFF
Item Specification Actual
Right Swing 31400 1000 kPa (4554 145 psi)
Left Swing 31400 1000 kPa (4554 145 psi) Introduction
Two relief valves are located in the head of the swing motor. These relief valves limit the pressure in the left and right swing circuits to the swing relief valve settings. The following procedure will determine if the swing relief valves are out of adjustment.Required Tools
Illustration 1 g01623868
Tooling group "B"
198-4240 Digital Pressure Indicator Gp
Table 2
Tool Item Qty Part Number Description
B 198-4240 Digital Pressure Indicator Gp
B1 1 198-4234 Indicator
B2 1 198-4239 Pressure Sensor 41,368 kPa (6,000 psi)
B3 1 198-4236 Extension Cable Machine Preparation
Position the machine on level ground and stop the engine.
Release the pressure in the hydraulic system. Refer to Testing and Adjusting, "System Pressure - Release".
Illustration 2 g02963877
Pump compartment
(1) Pressure tap (delivery pressure for drive pump)
(2) Pressure tap (delivery pressure for idler pump)
Attach a 41,368 kPa (6,000 psi) pressure sensor to pressure tap (2).
Illustration 3 g02073273
Pilot manifold
(4) Solenoid valve for swing parking brake
(5) Connector
Disconnect connector (5) from the solenoid valve for swing parking brake (4). Test Procedure
Start the engine.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Place the machine controls at the following settings: engine speed dial "10" and AEC switch OFF. Refer to Testing and Adjusting, "Engine Performance - Test (Engine Speed)" for engine rpm settings.
Place the hydraulic activation control lever in the UNLOCKED position.
Move the swing joystick slowly and ensure that the swing parking brake is operating properly.
Illustration 4 g02074640
Swing motor
(6) Adjustment plug
(7) Locknut
(8) Relief valve (right swing)
(9) Adjustment plug
(10) Locknut
(11) Relief valve (left swing)
Slowly move the swing joystick for a full SWING RIGHT operation and check the pressure for relief valve (8) at pressure tap (2). Refer to Table 1 for swing relief pressure.
Return the joystick to the NEUTRAL position.
Slowly move the swing joystick for a full SWING LEFT operation and check the pressure for relief valve (11) at pressure tap (2). Refer to Table 1 for swing relief pressure.
Return the joystick to the NEUTRAL position. Adjustment Procedure
To adjust the swing relief valve, loosen the locknut and turn the adjustment plug until the pressure reading at pressure tap (2) is within the specification. Note: Turning the adjustment plug clockwise increases the pressure. Turning the adjustment plug counterclockwise decreases the pressure.Note: Always make final pressure adjustments on pressure rise.
Tighten the locknut to a torque of 117 10 N m (85 7 lb ft).
Table 1
"Relief Valve (Swing) - Test and Adjust"
Machine Settings Engine Speed
Engine speed dial "10"
AEC switch OFF
Item Specification Actual
Right Swing 31400 1000 kPa (4554 145 psi)
Left Swing 31400 1000 kPa (4554 145 psi) Introduction
Two relief valves are located in the head of the swing motor. These relief valves limit the pressure in the left and right swing circuits to the swing relief valve settings. The following procedure will determine if the swing relief valves are out of adjustment.Required Tools
Illustration 1 g01623868
Tooling group "B"
198-4240 Digital Pressure Indicator Gp
Table 2
Tool Item Qty Part Number Description
B 198-4240 Digital Pressure Indicator Gp
B1 1 198-4234 Indicator
B2 1 198-4239 Pressure Sensor 41,368 kPa (6,000 psi)
B3 1 198-4236 Extension Cable Machine Preparation
Position the machine on level ground and stop the engine.
Release the pressure in the hydraulic system. Refer to Testing and Adjusting, "System Pressure - Release".
Illustration 2 g02963877
Pump compartment
(1) Pressure tap (delivery pressure for drive pump)
(2) Pressure tap (delivery pressure for idler pump)
Attach a 41,368 kPa (6,000 psi) pressure sensor to pressure tap (2).
Illustration 3 g02073273
Pilot manifold
(4) Solenoid valve for swing parking brake
(5) Connector
Disconnect connector (5) from the solenoid valve for swing parking brake (4). Test Procedure
Start the engine.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Place the machine controls at the following settings: engine speed dial "10" and AEC switch OFF. Refer to Testing and Adjusting, "Engine Performance - Test (Engine Speed)" for engine rpm settings.
Place the hydraulic activation control lever in the UNLOCKED position.
Move the swing joystick slowly and ensure that the swing parking brake is operating properly.
Illustration 4 g02074640
Swing motor
(6) Adjustment plug
(7) Locknut
(8) Relief valve (right swing)
(9) Adjustment plug
(10) Locknut
(11) Relief valve (left swing)
Slowly move the swing joystick for a full SWING RIGHT operation and check the pressure for relief valve (8) at pressure tap (2). Refer to Table 1 for swing relief pressure.
Return the joystick to the NEUTRAL position.
Slowly move the swing joystick for a full SWING LEFT operation and check the pressure for relief valve (11) at pressure tap (2). Refer to Table 1 for swing relief pressure.
Return the joystick to the NEUTRAL position. Adjustment Procedure
To adjust the swing relief valve, loosen the locknut and turn the adjustment plug until the pressure reading at pressure tap (2) is within the specification. Note: Turning the adjustment plug clockwise increases the pressure. Turning the adjustment plug counterclockwise decreases the pressure.Note: Always make final pressure adjustments on pressure rise.
Tighten the locknut to a torque of 117 10 N m (85 7 lb ft).
Caterpillar parts catalog:
Parts injector Caterpillar catalog:
206B, 211B, 3114, 3116, 325, 613C II, 950F, 950F II, 960F
3114, 3116
