7E8952 INJECTOR GP-FUEL Caterpillar parts
3116
Rating:
Alternative (cross code) number:
CA7E8952
7E-8952
7E8952
CA7E8952
7E-8952
7E8952
Weight: 1 pounds 0 kg.
TRUCK ENGINE,
Related part:
7E8952
INJECTOR GP-FUEL
0R3389
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
IMIFAFTAbT 0R-8471 7E-8952 0R-3389 4P-2995 4P2995 CA4P2995 4 PCS Fuel injector Fits for Caterpillar 3114 3116 3116DIT Engine 953C 963B 963C Track loader 924F 928G 938F 938G 950F Wheel loader
IMIFAFTAbT Product Name: 4P-2995 4P2995 CA4P2995 0R-8471 7E-8952 0R-3389 Fuel injector || Part number: 4P-2995 4P2995 CA4P2995 0R-8471 7E-8952 0R-3389 || Fits for Caterpillar 3114 3116 3116DIT Engine 953C 963B 963C Track loader 924F 928G 938F 938G 950F Wheel loader 120H 135H Motor Grader || 4 PCS Fuel injector || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm you can leave us a message and provide your engine serial number and nameplate
IMIFAFTAbT Product Name: 4P-2995 4P2995 CA4P2995 0R-8471 7E-8952 0R-3389 Fuel injector || Part number: 4P-2995 4P2995 CA4P2995 0R-8471 7E-8952 0R-3389 || Fits for Caterpillar 3114 3116 3116DIT Engine 953C 963B 963C Track loader 924F 928G 938F 938G 950F Wheel loader 120H 135H Motor Grader || 4 PCS Fuel injector || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm you can leave us a message and provide your engine serial number and nameplate
Fuel Injector 7E-8952 7E8952 Fits for Caterpillar CAT 613C Wheeled Tractor 1PCS
SXCCGMGQ Part Name: Fuel Injector || Part Number:7E-8952 7E8952 || Application:Fits for Caterpillar CAT 613C Wheeled Tractor || Attention: Before making payment, please confirm that the product part number is compared to your original equipment and ensure that it is suitable for your machine || Trustworthy: This product through strict quality testing, to provide reliable product quality and after-sales service, so that you use no worries.
SXCCGMGQ Part Name: Fuel Injector || Part Number:7E-8952 7E8952 || Application:Fits for Caterpillar CAT 613C Wheeled Tractor || Attention: Before making payment, please confirm that the product part number is compared to your original equipment and ensure that it is suitable for your machine || Trustworthy: This product through strict quality testing, to provide reliable product quality and after-sales service, so that you use no worries.
Fuel Injector 7E-8952 7E8952 Fits for Caterpillar CAT Wheel Lorader 924F 928G 938F 938G 950F 950F II 1PCS
SXCCGMGQ Part Name: Fuel Injector || Part Number:7E-8952 7E8952 || Application:Fits for Caterpillar CAT Wheel Lorader 924F 928G 938F 938G 950F 950F II || Attention: Before making payment, please confirm that the product part number is compared to your original equipment and ensure that it is suitable for your machine || Trustworthy: This product through strict quality testing, to provide reliable product quality and after-sales service, so that you use no worries.
SXCCGMGQ Part Name: Fuel Injector || Part Number:7E-8952 7E8952 || Application:Fits for Caterpillar CAT Wheel Lorader 924F 928G 938F 938G 950F 950F II || Attention: Before making payment, please confirm that the product part number is compared to your original equipment and ensure that it is suitable for your machine || Trustworthy: This product through strict quality testing, to provide reliable product quality and after-sales service, so that you use no worries.
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 7E8952:
Information:
Engine Crankshaft Will Not Turn: Recommended Procedure
1. Low or No Battery Voltage - Check battery voltage. If battery voltage is less than 8 volts, put a charge to the battery. If battery will not hold a charge, install a new battery.2. Bad Switch, Bad Wiring or Connection in Switch Circuit - With ignition switch in START position, check voltage at switch connection on starter solenoid. If there is no voltage, or if the voltage is low at this connection, check wiring, connections, ignition switch, and magnetic switch (if used).3. Bad Cable or Connection; Battery to Starter - With ignition switch in the START position, check voltage at connection of battery cable to starter. If there is no voltage, or if the voltage is low at this connection and there is good voltage at the battery, check for bad cable or connection between the battery and the starter.4. Bad Starter Solenoid - Remove and repair a solenoid which does not work when voltage is correct at both the battery and ignition switch connections.5. Bad Starting Motor - If the solenoid works and the starting motor does not turn the crankshaft, the starting motor is bad. Before removing the starting motor, turn the crankshaft by hand to be sure a mechanical failure inside the engine, transmission, or power take-off is not preventing the crankshaft from turning. If crankshaft turns freely by hand, engage the starting motor again. If the starting motor still will not work, remove the starting motor and repair it or install a new starting motor.6. Transmission or Power Take-Off Problem Prevents Crankshaft From Turning - If crankshaft can not be turned by hand, disconnect the transmission and power take-off. If crankshaft will now turn, find cause of the problem in the transmission or power take-off and make necessary corrections.7. Inside Problem Prevents Engine Crankshaft From Turning - If the crankshaft can not be turned after disconnecting the transmission and power take-off, remove the fuel nozzles and check for fluid in the cylinders while turning the crankshaft. If fluid in the cylinders is not the problem, the engine must be disassembled to check for other inside problems. Some of these inside problems are bearing seizure, piston seizure, and valves making contact with pistons.Engine Crankshaft Turns Too Slowly
8. Low Battery Voltage - Check battery voltage. If battery voltage is less than 8 volts, put a charge to the battery. If battery will not hold a charge, install a new battery.9. Bad Cable or Connection; Battery to Starter - With switch in START position, check voltage at battery cable connection to starter. If voltage is less than 8 volts check the cables and connections.10. Oil Too Thick For Free Crankshaft Rotation - Use SAE 10W/30, 10W/40, or SAE 30 grade oils for temperatures above 32° F (0° C). Use SAE 10W, 10W/30, or 10W/40 grade oils for temperatures below 32° F (0° C). At temperatures below -10° F (-23° C) it may be necessary to warm the oil for
1. Low or No Battery Voltage - Check battery voltage. If battery voltage is less than 8 volts, put a charge to the battery. If battery will not hold a charge, install a new battery.2. Bad Switch, Bad Wiring or Connection in Switch Circuit - With ignition switch in START position, check voltage at switch connection on starter solenoid. If there is no voltage, or if the voltage is low at this connection, check wiring, connections, ignition switch, and magnetic switch (if used).3. Bad Cable or Connection; Battery to Starter - With ignition switch in the START position, check voltage at connection of battery cable to starter. If there is no voltage, or if the voltage is low at this connection and there is good voltage at the battery, check for bad cable or connection between the battery and the starter.4. Bad Starter Solenoid - Remove and repair a solenoid which does not work when voltage is correct at both the battery and ignition switch connections.5. Bad Starting Motor - If the solenoid works and the starting motor does not turn the crankshaft, the starting motor is bad. Before removing the starting motor, turn the crankshaft by hand to be sure a mechanical failure inside the engine, transmission, or power take-off is not preventing the crankshaft from turning. If crankshaft turns freely by hand, engage the starting motor again. If the starting motor still will not work, remove the starting motor and repair it or install a new starting motor.6. Transmission or Power Take-Off Problem Prevents Crankshaft From Turning - If crankshaft can not be turned by hand, disconnect the transmission and power take-off. If crankshaft will now turn, find cause of the problem in the transmission or power take-off and make necessary corrections.7. Inside Problem Prevents Engine Crankshaft From Turning - If the crankshaft can not be turned after disconnecting the transmission and power take-off, remove the fuel nozzles and check for fluid in the cylinders while turning the crankshaft. If fluid in the cylinders is not the problem, the engine must be disassembled to check for other inside problems. Some of these inside problems are bearing seizure, piston seizure, and valves making contact with pistons.Engine Crankshaft Turns Too Slowly
8. Low Battery Voltage - Check battery voltage. If battery voltage is less than 8 volts, put a charge to the battery. If battery will not hold a charge, install a new battery.9. Bad Cable or Connection; Battery to Starter - With switch in START position, check voltage at battery cable connection to starter. If voltage is less than 8 volts check the cables and connections.10. Oil Too Thick For Free Crankshaft Rotation - Use SAE 10W/30, 10W/40, or SAE 30 grade oils for temperatures above 32° F (0° C). Use SAE 10W, 10W/30, or 10W/40 grade oils for temperatures below 32° F (0° C). At temperatures below -10° F (-23° C) it may be necessary to warm the oil for
Caterpillar parts catalog:
Parts injector Caterpillar catalog:
214B, 3114, 3116, 446B, AP-1000, AP-1050, E240C
3114, 3116, 55, 613C II, 950F, 950F II, 960F, 963B, BG-2455C, BG-245C, CB-634, CB-634C
3114, 3116, 325, 325 L, 35, 45, 55, 950F, 950F II, 960F
214B, 3114, 3116, E240C
3116, 3126
3116, 3406B
9Y3113
INJECTOR GP-FUEL
3114, 3116
3114, 3116
206B, 211B, 3114, 3116, 325, 613C II, 950F, 950F II, 960F
3114, 3116