INLET AS 3629546 - Caterpillar

1. Remove two fuel lines (1) from the engine. Disconnect fuel line (2) from the fuel injection pump. 2. Remove tube (4).3. Remove the bolts that hold block (3) to the fuel injection pump, and remove the block. 4. Fasten a hoist to the fuel injection pump, and remove the nuts that hold the fuel injection pump to the timing gear plate. Remove bolts (5) and (6), and remove fuel injection pump and governor (7) from the engine. The weight of the fuel injection pump and governor is 57 kg (125 lb.).5. Remove the three O-ring seals from the fuel injection pump.Install Fuel Injection Pump And Governor
1. Put the three O-ring seals in position on fuel injection pump and governor (1). Put clean engine oil on the O-ring seals.2. Install fuel injection pump and governor (1) on the engine, and install the nuts that hold it to the timing gear plate.3. Install the three bolts that hold the fuel injection pump and governor to the cylinder block. 4. Put block (2) in position, and install the bolts that hold the block to the fuel injection pump. Install tube (3). 5. Install two lines (5) on the engine, and connect fuel line (4) to the fuel injection pump.END BY:a. install fuel injection pump and governor drive (marine engine)b. install automatic timing advance (industrial engine)c. install fuel injection lines