AVSPARE.COM
parts catalog

INNER RACE (CUP) 0004132 - Caterpillar



0004132 INNER RACE (CUP) Caterpillar parts WE-601B INNER
Rating:
72
Alternative (cross code) number:
CA0004132
000-4132
0004132
Caterpillar 0004132 INNER RACE (CUP)

Buy INNER RACE (CUP) 0004132 Caterpillar genuine, new aftermarket tractor parts with delivery
WINDROW ELEVATOR,

Compatible equipment models: 0004132:

WINDROW ELEVATOR  WE-601B   Caterpillar
Number on catalog scheme: 31
  
  For full view, you need register

Information:

Flash Program
Perform the following procedure in order to flash program the ECM. The ECM is flashed in order to upgrade the software. The new software will allow the ECM to communicate with the AccuGrade - Grade Control System. The Caterpillar Electronic Technician (Cat ET) contains the program WinFlash. WinFlash is used in order to load software into the ECM. The following procedure is used in order to FLASH software into the ECM.
Procedure
Connect the 196-0055 Data Link Cable between the 171-4400 Communication Adapter or the 275-5120 Communication Adapter and the Cat ET.
Connect the 207-6845 Data Link Cable between the 171-4400 Communication Adapter and the diagnostic connector of the machine.
Table 1
Software    
Part Number    Component    
297-0153     Electric Mast    
297-0154     LR400 Receiver    
292-1268     LR410 Receiver    
302-4509     Display    
296-2868     Angle Sensor    
284-5170     Rotation Sensor    
305-7418     Grade Slope Control    
Use WinFlash in order to load the software. Refer to Table 1 for the part number of the software.Note: Flash programming is NOT allowed if the engine is running, or the machine is moving.Components (AccuGrade - Grade Control System) Flash Program
Perform the following procedure in order to flash program the system components. The system components are flashed in order to upgrade the software. The new software will allow the system components to communicate with the ECM and each other. The Cat ET contains the program WinFlash. WinFlash is used in order to load software into the system components. The following procedure is used in order to FLASH software into the system components.
Do not stop the process. The ECM will be damaged and need to be replaced.
Procedure
Connect the 196-0055 Data Link Cable between the 171-4400 Communication Adapter or the 275-5120 Communication Adapter and the Cat ET.
Connect the 207-6845 Data Link Cable between the 171-4400 Communication Adapter and the diagnostic connector of the machine.
Use WinFlash in order to load the software. Refer to Table 1 for the part number of the software.Note: Flash programming is NOT allowed if the engine is running, or the machine is moving.

Caterpillar parts catalog:

Caterpillar parts catalog
WE-601B WINDROW ELEVATOR 7EC00168-UP (MACHINE)


Parts inner Caterpillar catalog:

3B8921 INNER RACE AND ROLLER ASSEM.
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.