6K4717 INNER RACE Caterpillar parts
955K, 955L
Rating:
Alternative (cross code) number:
CA6K4717
6K-4717
6K4717
CA6K4717
6K-4717
6K4717
Weight: 1 pounds 0 kg.
TRACK LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$26.52
29 Jun 2023
Amazon.com
CTP 6K4717 Inner Race and Roller Bearing Assembly
CTP Inner Race and Roller Bearing Assembly Only || Sold in each || Easy in-and-out fit
CTP Inner Race and Roller Bearing Assembly Only || Sold in each || Easy in-and-out fit
$27.79
29 May 2023
Amazon.com
CTP 6K4717 Inner Race and Roller Bearing Assembly
CTP Inner Race and Roller Bearing Assembly Only || Sold in each || Easy in-and-out fit
CTP Inner Race and Roller Bearing Assembly Only || Sold in each || Easy in-and-out fit
$29.51
17 Oct 2022
Amazon.com
CTP 6K4717 Inner Race and Roller Bearing Assembly
CTP Inner Race and Roller Bearing Assembly Only || Sold in each || Easy in-and-out fit
CTP Inner Race and Roller Bearing Assembly Only || Sold in each || Easy in-and-out fit
Number on catalog scheme:
None
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01253344
Align bearings (12) in the body of engine oil pump (9). The bearing joints should be 45 15 degrees from the centerline of the bearing bores.
Use Tooling (A) and a suitable press to install bearings (12). The bearings must be 1.5 0.5 mm (0.06 0.02 inch) below the gear bore. The diameter of the bearings must be 31.811 0.013 mm (1.2524 0.0005 inch) after installation.
Illustration 2 g00591964
Replace gears (11) and the shaft assemblies, if necessary.
Illustration 3 g00591963
Install shaft assemblies (10) in engine oil pump (9).
Illustration 4 g01253345
Illustration 5 g00591962
Ensure that dowels (13) and (14) are installed in cover assembly (7) at a distance of 6.0 0.5 mm (0.24 0.02 inch) above the surface of the cover.
Use Tooling (A) and a suitable press to install bearings (8) in cover assembly (7) with the bearing joints in the correct position. The bearing joints should be 45 15 degrees from the centerline of the bearing bores.
Install cover assembly (7) on the engine oil pump.
Illustration 6 g01253349
Ensure that the pins in cover assembly (6) are installed at a distance of 6.0 1.0 mm (0.24 0.04 inch) above the surface of the cover.
Install the gasket and cover assembly (6) on the engine oil pump.
Illustration 7 g00591930
Illustration 8 g00591928
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Place clean engine oil on valve spool (5). Install spring (4), gasket (3), cover (2), and bolts (1). End By:
Install the engine oil pump.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01253344
Align bearings (12) in the body of engine oil pump (9). The bearing joints should be 45 15 degrees from the centerline of the bearing bores.
Use Tooling (A) and a suitable press to install bearings (12). The bearings must be 1.5 0.5 mm (0.06 0.02 inch) below the gear bore. The diameter of the bearings must be 31.811 0.013 mm (1.2524 0.0005 inch) after installation.
Illustration 2 g00591964
Replace gears (11) and the shaft assemblies, if necessary.
Illustration 3 g00591963
Install shaft assemblies (10) in engine oil pump (9).
Illustration 4 g01253345
Illustration 5 g00591962
Ensure that dowels (13) and (14) are installed in cover assembly (7) at a distance of 6.0 0.5 mm (0.24 0.02 inch) above the surface of the cover.
Use Tooling (A) and a suitable press to install bearings (8) in cover assembly (7) with the bearing joints in the correct position. The bearing joints should be 45 15 degrees from the centerline of the bearing bores.
Install cover assembly (7) on the engine oil pump.
Illustration 6 g01253349
Ensure that the pins in cover assembly (6) are installed at a distance of 6.0 1.0 mm (0.24 0.04 inch) above the surface of the cover.
Install the gasket and cover assembly (6) on the engine oil pump.
Illustration 7 g00591930
Illustration 8 g00591928
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Place clean engine oil on valve spool (5). Install spring (4), gasket (3), cover (2), and bolts (1). End By:
Install the engine oil pump.
Cat SIS web machinery list:
Parts inner Caterpillar catalog:
955H, 955K, 955L, D3B
955H, 955K, 955L, D3B
12F, 14E, D9G
594, 594H, D8H, D8K, D9G, D9H
5S7021
INNER RACE AND ROLLER ASSEM.
528, 54, 983
528, 54, 983
977K, 977L, D6C, D6D
12E, 955C, 977D
14M, 16M, 572G, 594, 594H, 627, 627B, 637, 637B, 980, 980B
571G
D7F, D7G, D8H, D8K
D9G, D9H