9H9472 INNER RACE & ROLLER ASSEM Caterpillar parts
561B, 977D
Rating:
Alternative (cross code) number:
CA9H9472
9H-9472
9H9472
CA9H9472
9H-9472
9H9472
Weight: 4 pounds 1 kg.
PIPELAYER, TRACK LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$136.56
04 May 2023
US: Florida-Parts-Z
9H9472 - Inner Race & Roller ASSEM for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$86.40
27 Jan 2018
430 Hundredths Pounds
CTP: CTP
Caterpillar 9H-9472 Cylindrical Roller Bearings (9H9472) New Aftermarket By CTP
9H9472 Caterpillar, Drive Train Parts Weight(lbs): 4.30 Length(cm): 11.8000 Width(cm): 5.0000 Depth(cm): 12.0000
9H9472 Caterpillar, Drive Train Parts Weight(lbs): 4.30 Length(cm): 11.8000 Width(cm): 5.0000 Depth(cm): 12.0000
$118.52
19 Jun 2020
-: -
9H9472 Roller AS Bearing - Inner Fits Caterpillar
9H9472 Roller As. Bearing - Inner
9H9472 Roller As. Bearing - Inner
Number on catalog scheme:
None
For full view, you need register
Information:
All Caterpillar ProductsCorrect electrical current measurements are easier to make with the new 6V4910 AC/DC Clamp-On Ammeter. The advantages of the ammeter are its small size with built in digital display, an internal (inside) power source and lower cost.
Formerly, the ammeter was large and had cable connections. It also needed an outside battery.
The ammeter is simpler to use because you do not have to break the circuit to make a current measurement. It will accept cables up to 19 mm (.75") in diameter.
... The liquid crystal digital display is accurate and easier to read than a meter with a needle.
... Four AA batteries are located inside the handle of the ammeter.
... The ammeter will read current from 1-500 amperes directly on the display. Above this (500-1000 A) correct the number shown according to the chart given in Special Instruction Form Number SEHS8030. Current under 1 ampere and measurements with .1 ampere resolution between .1 and 199 amperes can be measured when you connect the ammeter output to a 6V3030 Digital Multimeter, with a 6V6014 Cable (optional). The current will be read on the multimeter display.
Illustration 1. The 6V4910 Clamp-On Ammeter.... The jaws of the ammeter open with a lever so the conductor can be inserted. These spring loaded jaws close around the conductor to measure the current.
... A trigger switch will turn the ammeter on. The switch can be locked. When the turn-on trigger is released, you will be able to read the last measurement for five seconds.
... The ammeter can be removed from the wire and the measurement can still be read. This feature is important in limited access areas where the display is hard to see.
... This tool has a zero control for D/C operation. Some of the specifications for the 6V4910 Clamp-On Ammeter are shown in the list that follows.
Complete specifications are included in the Special Instruction SEHS8030.
In addition to the basic ammeter, the following cases and tools are available to protect the tool and for use with it. They must be ordered separately.
Illustration 2. In addition to the Ammeter, these items are also available.
Formerly, the ammeter was large and had cable connections. It also needed an outside battery.
The ammeter is simpler to use because you do not have to break the circuit to make a current measurement. It will accept cables up to 19 mm (.75") in diameter.
... The liquid crystal digital display is accurate and easier to read than a meter with a needle.
... Four AA batteries are located inside the handle of the ammeter.
... The ammeter will read current from 1-500 amperes directly on the display. Above this (500-1000 A) correct the number shown according to the chart given in Special Instruction Form Number SEHS8030. Current under 1 ampere and measurements with .1 ampere resolution between .1 and 199 amperes can be measured when you connect the ammeter output to a 6V3030 Digital Multimeter, with a 6V6014 Cable (optional). The current will be read on the multimeter display.
Illustration 1. The 6V4910 Clamp-On Ammeter.... The jaws of the ammeter open with a lever so the conductor can be inserted. These spring loaded jaws close around the conductor to measure the current.
... A trigger switch will turn the ammeter on. The switch can be locked. When the turn-on trigger is released, you will be able to read the last measurement for five seconds.
... The ammeter can be removed from the wire and the measurement can still be read. This feature is important in limited access areas where the display is hard to see.
... This tool has a zero control for D/C operation. Some of the specifications for the 6V4910 Clamp-On Ammeter are shown in the list that follows.
Complete specifications are included in the Special Instruction SEHS8030.
In addition to the basic ammeter, the following cases and tools are available to protect the tool and for use with it. They must be ordered separately.
Illustration 2. In addition to the Ammeter, these items are also available.
Caterpillar parts catalog:
Parts inner Caterpillar catalog:
12E, 955C, 977D
12E, 955C, 977D
14M, 16M, 572G, 594, 594H, 627, 627B, 637, 637B, 980, 980B
571G
D7F, D7G, D8H, D8K
D9G, D9H
583H, D8H, D8K, D9E
2M8308
INNER RACE
977H
977H
955H, 977H
4B3697
INNER RACE
769, 955H
769, 955H
5H1622
INNER RACE
583H
583H