INSERT-LINER SEAT 1045527 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     2    
Illustration 1 g01107129
Attach Tooling (A) and a suitable lifting device to flywheel (2). The weight of the flywheel is approximately 57 kg (125 lb).
Remove bolts (1). Remove flywheel (2) .
Inspect the flywheel ring gear. Replace the ring gear, if necessary. Place the flywheel on a wood block. Use a hammer and a punch in order to remove the ring gear.Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     2    
Raise the temperature of the ring gear. Install the ring gear on the flywheel. Position the ring gear with the part number toward the crankshaft. Allow the ring gear to cool. Use a soft hammer in order to seat the ring gear against the shoulder of the flywheel.
Illustration 2 g01107129
Attach Tooling (A) and a suitable lifting device to flywheel (2). The weight of the flywheel is approximately 57 kg (125 lb).Note: Use new bolts for installation.
Position flywheel (2) on the engine. Align the arrows on the flywheel and the crankshaft. Install bolts (1). Tighten the bolts evenly to a torque of 270 40 N m (200 30 lb ft).
Check the flywheel runout. Refer to Testing and Adjusting, "Flywheel - Inspect".