INSERT-VALVE SEAT 1085912 - Caterpillar

Tools and Parts
General List of Tools
Table 1
General List of Tools    
Tool Type/Drive     Description    
1/4 inch Drive     1/4 inch Drive Socket Wrench    
1/4 inch Drive Torque Wrench 5 to 125 in lbs
1/4 inch Socket
3/8 inch Socket
7/16 inch Socket
3 inch Extension
6 inch Extension
   
3/8 inch Drive     3/8 inch Drive Socket Wrench    
3/8 inch Drive Torque Wrench 5 to 125 ft lbs
1/4 inch Deep Socket
3/8 inch Deep Socket
7/16 inch Deep Socket
1/2 inch Deep Socket
9/16 inch Deep Socket
3/4 inch Deep Socket
1 inch Deep Socket
3 inch Extension
6 inch Extension
12 inch Extension
   
1/2 inch Drive     1/2 inch Drive Socket Wrench    
1 1/8 inch Deep Socket
   
Wrenches     5/16 inch Open End/Box End    
3/8 inch Open End/Box End
7/16 inch Open End/Box End
1/2 inch Open End/Box End
9/16 inch Open End/Box End
5/8 inch Open End/Box End
11/16 inch Open End/Box End
3/4 inch Open End/Box End
1 1/16 inch Open End/Box End
1 1/2 inch Open End/Box End
1 1/8 inch Open End/Box End (Cut Short)
   
Hex Wrenches     7/64 inch Hex for RPS Sensor    
    3/16 inch Hex for transformer removal    
    5/16 inch Hex for door    
    5/32 inch Hex for FC IGBT's (1) and DC capacitors    
    5 mm Hex for Capacitors on FW IGBT's    
   
Hex Sockets     1/4 inch Hex Socket for Load Cell    
    5/16 inch Hex Socket    
    10 mm Hex Socket for K3 and K4 removal    
General Tools    
Set of Phillips Head Screwdrivers     Inspection mirror    
Set of Flat Head Screwdrivers     Magnet    
Drop light     Thread Lock Compound    
Wire Strippers 10 - 18 AWG     Terminal Crimpers 10 - 18 AWG    
Fuse Puller Small/Large     Safety Glasses    
Electronic Safety Gloves - Inner (Class "O" Rubber)     Electronic Safety Gloves - Outer (12 inch Leather)    
Special Tools    
Depth Micrometer or Vernier Caliper     Oscilloscope    
AC/DC Current Probe (Fluke® 80i to 110s or equivalent)     Digital Multimeter (Fluke® 87 or equivalent) and Deluxe Test Lead Set)    
3000 Amp Current Probe Clamp (Fluke® 3000i or equivalent)     AMP Pin extractor (Micro, Mini, Large)    
Feeler Gauges (4 Sets)     Electrostatic Discharge (ESD) Wrist Strap    
Alignment Pins for bearing insertion (2 required)     USB to RS-232 Adapter    
Bearing Shim pack for Bearing Cartridge     Rotor Shim set (4 required)    
Calibration Plugs for Load Cell calibration MIN and MAX     Bearing Removal Tool (Puller)    
Contact Wedge for Load Cell Installation     Bearing Installation Tool    
UPS View     High Vacuum Grease    
( 1 ) Insulated Gate Bipolar Transistor