INSERT-VALVE SEAT 2899745 - Caterpillar

Illustration 1 g00845481
Protective Relays (1) Display for the generator multifunction relay (GMR) (2) Generator multifunction relay (GMR) (3) Utility multifunction relay (UMR) (4) Display for the utility multifunction relay (UMR) (5) Push button for revision of the function (typical location) (6) RS232 Interface (typical location) (7) Target indicator for the 86G generator differential relay (optional equipment) (8) Target reset (typical location) (9) Push button for reset of the target (typical location)Generator Multifunction Relay (GMR)The GMR (2) is a drawout relay. The relay can be removed by loosening the thumbscrews and then pulling out the relay. The relay has adjustable pickup and adjustable time delay settings. The relay settings are programmable in the field. The display for the generator multifunction relay (1) contains a menu for different settings. The relay can be programmed by the touch pad that is located on the relay. The GMR is connected to the PLC with a cable for serial communications.Both the alarm and the shutdown are displayed. These operations are indicated by a flashing lamp and a sounding of the alarm horn. The reset for the alarm and the reset for shutdown are controlled by the engine control switch (ECS).The protective relaying functions of the GMR that are set at the factory for cooldown on trip include the following functions:
Reverse Power (ANSI device 32)
Loss of Excitation (ANSI device 40Q)
Undervoltage (ANSI device 27)
Under Frequency (ANSI device 81U)
Negative Sequence Overcurrent (ANSI device 46)
Overcurrent (ANSI device 50/51) (medium voltage switchgear)These functions are also programmable from