INSERT-VALVE SEAT 3177210 - Caterpillar

The power module is equipped with the following components: engine, generator, control systems and fuel tank.Intended Use
The power module is a complete self-contained unit for generating electrical power.The power module is transportable. The power module can be towed to any location for the generation of electrical power. The power module can be utilized for prime power generation or standby power generation.Engine
3500 Generator Set Engines are electronically controlled diesel engines. The engines have electronic fuel injectors. The engines can be equipped with either jacket water aftercooling or separate circuit aftercooling. The engine is offered in an 8 cylinder engine, a 12 cylinder engine, and a 16 cylinder engine.Engine efficiency and engine performance depend on adherence to proper operation and maintenance recommendations. Use the recommended fuels, lubrication oils, and coolant. Pay special attention to the air cleaner, to the fuel system, to the lubrication system, and to the cooling system maintenance. Refer to the Operation and Maintenance Manual, "Maintenance Interval Schedule" for more information on maintenance items. Generator
The SR4B brushless generator can be used with the following loads: mixed loads of motors and lights, SCR-controlled equipment, computer centers, installations of communications and petroleum drilling applications. SR4B generators are utilized in three-phase full-wave excitation and regulation. The generators are either four pole or six pole designs with six lead configurations or 12 lead configurations. The generators can produce electrical power in either 50 Hz or 60 Hz applications.Power Module Enclosure
Basic Container
The enclosure for the power module is a shipping container that is mounted to an undercarriage chassis. The container meets the following standards and regulations:
ISO/TC 104 Requirements for cargo containers
ANSI/ MH5.1 Basic requirements for cargo containers
ANSI/MH5.1.1 Requirements for closed van containers
UIC Code 592-1 International union of railwayLoad Cable Access Door
Illustration 1 g03842787
Load cable access door
Illustration 2 g03842820
Bus bar with connected load leadsThe load cable access door is located outside of the power module. This access door is for access to the bus bars in order to connect the load leads. Vertical Discharge Partition Panel
Illustration 3 g03842846
Vertical discharge partition panelThe vertical discharge partition panel is located between the radiators. The panel directs hot air from the radiator and engine exhaust through an opening in the roof. This panel helps direct the hot air away from the surrounding area of the power module.Fire Extinguishers
Illustration 4 g03842858
Fire extinguisherFire extinguishers and fire suppression systems are available as standard equipment.Louvers
Illustration 5 g03842867
LouverLouvers are installed in the power module in order to receive fresh air. The louvers are sized in order to meet the inlet air supply that is required for the power module. The louvers allow fresh air to enter the power module that is needed for the engine air inlet and for radiator cooling during full load.There are louvers that can be opened and closed manually. There are also louvers that can be opened or closed automatically. The louvers that are operated manually require the operator to open the louvers before the operation of the power module. The louvers that are operated manually require the operator to close the