INSERT KIT 9S3500 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 1
Illustration 1 g01122279
Install pin (8) in planetary shaft (5).
Apply clean oil to sleeve bearing (7). Install sleeve bearing (7) in gear (9).
Illustration 2 g01086262
Illustration 3 g01086268
Use Tooling (A) and a suitable lifting device to position planetary carrier (1) on a suitable block. The weight of the final drive is approximately 130 kg (287 lb). Install thrust washer (6), gear (9), and thrust washer (10) in final drive (1).
Install planetary shaft (5) in final drive (1). Align pin (8) with the slot in the planetary carrier.
Repeat steps 1 through 4 for the installation of the other two planetary gears.
Illustration 4 g06137448
Install O-ring seal (4) to final drive (1). Install final drive (1) into wheel assembly (3).
Illustration 5 g00519502
Install three bolts (2) into final drive (1).
Illustration 6 g00519500
Remove Tooling (A) from final drive (1).End By:
Install axle shaft.