2389424 INSTALLATION GP-CONTROLS Caterpillar parts 826H INSTALLATION
Rating:
Alternative (cross code) number:
CA2389424
238-9424
2389424
CA2389424
238-9424
2389424

Buy INSTALLATION GP-CONTROLS 2389424 Caterpillar genuine, new aftermarket tractor parts with delivery
LANDFILL COMPACTOR,
Compatible equipment models: 2389424:
LANDFILL COMPACTOR 826H
Caterpillar
Information:
Illustration 1 g00037887
Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before servicing or before repairing the machine. These warning tags are Special Instruction, SEHS7332. These warning tags are available from your Caterpillar dealer.Know the width of your equipment in order to maintain proper clearance near fences, boundary obstacles, etc.Wear a hard hat, protective glasses and other protective equipment in order to accommodate job conditions.Do not wear loose clothing or jewelry that can catch on controls or on other parts of the machine.Ensure that all protective guards and all covers are secured in place on the machine.Keep the machine free from foreign material. Remove debris, oil, tools and other items from the deck, from walkways and from steps.Secure all loose items that are not a part of the machine. Secure lunch boxes, tools and other items.Know the appropriate work site hand signals. Also, know the personnel that are authorized to give the hand signals. Accept signals from one person only. Do not smoke when you service an air conditioner. Also, do not smoke if refrigerant gas may be present. Inhaling the fumes that are emitted from a flame that contacts air conditioner refrigerant can cause bodily harm or death. Inhaling gas from air conditioner refrigerant through a lighted cigarette can cause bodily harm or death.Never put maintenance fluids into glass containers. Drain all liquids into a suitable container. When you discard a liquid, abide by local regulations.Use all cleaning solutions with care. Report all necessary repairs.Do not allow unauthorized personnel on the machine.Unless you are instructed otherwise, perform the maintenance with the following conditions:
The machine is parked on level ground.
The attachments are lowered to the ground.
The attachment controls are in the HOLD position.
The transmission control is in the NEUTRAL position.
The parking brake switch is engaged.
The engine is stopped.
The engine start switch key is turned off and the key is removed.
The disconnect switch is in the OFF position and the key is removed.Pressure Air
Pressure air can cause personal injury. When pressure air is used for cleaning, wear a protective face shield, protective clothing and protective shoes.The maximum air pressure must be below 205 kPa (30 psi) for cleaning purposes.Fluid Penetration
Always use a board or cardboard when you check for a leak. Leaking fluid under pressure can penetrate body tissue. Fluid penetration can cause serious injury and possible death. A pin hole leak can cause severe injury. If fluid is injected into your skin, you must obtain treatment immediately. Seek treatment from a doctor that is familiar with this type of injury.Containing Fluid Spillage
Care must be taken in order to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Tools and Shop Products Guide" for the following items:
Tools that are suitable for collecting fluids and for containing fluids
Equipment
Caterpillar SIS machinery equipment:
Caterpillar SIS
- 826H Landfill Compactor AWF00001-UP (MACHINE) POWERED BY C15 Engine » 238-9424 INSTALLATION GP-CONTROLS
Caterpillar parts catalog:
Parts installation Caterpillar catalog:
3059186
INSTALLATION GP-RADIO
826H, 836H, 988G
826H, 836H, 988G
3276984
INSTALLATION GP-CONTROLS
824H, 825H, 826H
824H, 825H, 826H
2745046
INSTALLATION AR-COMMUNICATION
824H, 825H, 826H
824H, 825H, 826H
2745057
INSTALLATION AR-COMMUNICATION
824H, 825H, 826H
824H, 825H, 826H
2857421
INSTALLATION AR-COMMUNICATION
824H, 825H, 826H
824H, 825H, 826H
2857422
INSTALLATION AR-COMMUNICATION
824H, 825H, 826H
824H, 825H, 826H
3375199
INSTALLATION AR-COMMUNICATION
854K, 992K
854K, 992K
3855577
INSTALLATION AR-BULLDOZER
D8R, D8T
D8R, D8T
1162611
INSTALLATION AR-ENGINE
CS-563C
CS-563C
7C3439
INSTALLATION AR-ENGINE
426, 428
426, 428
3594775
INSTALLATION GP-COMMUNICATION
M316D, M318D, M318D MH, M322D, M322D MH
M316D, M318D, M318D MH, M322D, M322D MH
3366200
INSTALLATION GP-RADIO
312D L, 315D L, 319D L, 319D LN
312D L, 315D L, 319D L, 319D LN
3109678
INSTALLATION AR-ENGINE
390D, 390D L
390D, 390D L
2457654
INSTALLATION GP-CONTROLS
966G II, 972G II
966G II, 972G II