parts catalog

INSTALLATION 3C8479 - Caterpillar

3C8479 INSTALLATION Caterpillar parts
Alternative (cross code) number:
Caterpillar 3C8479 INSTALLATION
Weight: 1 pounds 0 kg.

Buy INSTALLATION 3C8479 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     2    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01192433
Install gasket (11) on the engine.
Install aftercooler housing (10) and the bolts.
Attach Tooling (A) and a suitable lifting device to aftercooler core (5). The weight of aftercooler core (5) is approximately 45 kg (100 lb). Install aftercooler core (5) and bolts (6) .
Install the O-ring seals, adapters (8), and adapters (9) .
Install gasket (7). Install aftercooler cover (2) and bolts (4) .
Illustration 2 g01192431
Install elbows (3) .
Illustration 3 g01192429
Install elbows (1) on aftercooler cover (2) .
Fill the cooling system with coolant to the correct level. Refer to Operation and Maintenance Manual, "Refill Capacities".

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.